Physicochemical characteristics and discolouration potentials of Pulpine mineral® and Pulpine NE®
##semicolon##
https://doi.org/10.5195/d3000.2024.533##semicolon##
MTA##common.commaListSeparator## Pulpine NE##common.commaListSeparator## Pulpine mineral##common.commaListSeparator## Radiopacity##common.commaListSeparator## Solubility##common.commaListSeparator## Crown discoloration要旨
ABSTRACT
Aim: To compare the physicochemical properties (solubility, pH, radiopacity and crown discoloration) of Pulpine mineral (PMIN) and Pulpine NE (PNE) with the conventional material, mineral trioxide aggregate (MTA).
Methodology: Specimens of the tested materials were prepared according to the manufacturer’s instructions using split Teflon ring molds. Solubility was evaluated by the percentage of material mass loss over 24 h and one week. The alkalinity was measured after each evaluation period using a pH meter. Other specimens were digitally radiographed on a size 2 sensor plate along with an aluminum step wedge to analyze the radiopacity by the Image J software. Finally, crown discoloration was assessed after applying the tested materials in the pulp chamber of sound human premolars using spectrophotometer. All data were statistically analyzed.
Results: Compared to MTA, both materials had significantly higher solubility and lower radiopacity (P<0.05). The alkalinity of PMIN was higher than that of MTA and PNE. Unlike PMIN, PNE and MTA caused crown discoloration.
Conclusions: PMIN exhibits promising results related to high alkalinity and adequate color stability but it needs modifications for radiopacity and solubility.
##submission.citations##
References
Mesenchymal stem cells promote hard-tissue repair after direct pulp capping. Obeid M, Saber Sel D, Ismael Ael D, Hassanien E. J Endod. 2013 May;39(5):626-31. PMID: 23611380.
Outcome of pulpotomy in permanent teeth with irreversible pulpitis: a systematic review and meta-analysis. Ather A, Patel B, Gelfond JAL, Ruparel NB. Sci Rep. 2022 Nov 16;12(1):19664. PMID: 36385132.
Physicochemical Properties of a Bioceramic Repair Material - BioMTA. Coaguila-Llerena H, Ochoa-Rodriguez VM, Castro-Núñez GM, Faria G, Guerreiro-Tanomaru JM, Tanomaru-Filho M. Braz Dent J. 2020 Sep-Oct;31(5):511-515. PMID: 33146335.
https://hoffmann-dental.com/produkte/?lang=en.
Histopathological and immunohistochemical profiles of pulp tissues in immature dogs' teeth to two recently introduced pulpotomy materials. Mohamed M, Hashem AAR, Obeid MF, Abu-Seida A. Clin Oral Investig. 2023 Jun;27(6):3095-3103. PMID: 36781475.
Evaluation of antibacterial activity of propolis on regenerative potential of necrotic immature permanent teeth in dogs. El-Tayeb MM, Abu-Seida AM, El Ashry SH, El-Hady SA. BMC Oral Health. 2019 Aug 6;19(1):174. PMID: 31387578.
Biological evaluation of hesperidin for direct pulp capping in dogs' teeth. Abo El-Mal EO, Abu-Seida AM, El Ashry SH. Int J Exp Pathol. 2021 Feb;102(1):32-44. PMID: 33405328.
Hydroxyapatite applied as direct pulp capping medicine substitutes for osteodentin. Hayashi Y, Imai M, Yanagiguchi K, Viloria IL, Ikeda T. J Endod. 1999 Apr;25(4):225-9. PMID: 10425944.
Evaluation of the tissue reaction to fast endodontic cement (CER) and Angelus MTA. Gomes-Filho JE, Rodrigues G, Watanabe S, Estrada Bernabé PF, Lodi CS, Gomes AC, Faria MD, Domingos Dos Santos A, Silos Moraes JC. J Endod. 2009 Oct;35(10):1377-80. PMID: 19801233.
Physiochemical properties of experimental nano-hybrid MTA. Akhavan Zanjani V, Tabari K, Sheikh-Al-Eslamian SM, Abrandabadi AN. J Med Life. 2017 Jul-Sep;10(3):182-187. PMID: 29075348.
Marginal adaptation, solubility and biocompatibility of TheraCal LC compared with MTA-angelus and biodentine as a furcation perforation repair material. Alazrag MA, Abu-Seida AM, El-Batouty KM, El Ashry SH. BMC Oral Health. 2020 Oct 29;20(1):298. PMID: 33121465.
ANSI/ADA (2000) Specification no 57 Endodontic sealing material. Chicago, USA: ADA Publishing.
Densitometric measurement of radiopacity of Gutta-percha cones and root dentin. Katz A, Kaffe I, Littner M, Tagger M, Tamse A. J Endod. 1990 May;16(5):211-3. PMID: 2074412.
Bioceramic materials in endodontics. Endodontic topics. Wang Z. 2015;32:3-0.
A Review of Tooth Discoloration after Regenerative Endodontic Therapy. Kahler B, Rossi-Fedele G. J Endod. 2016;42(4):563-569. PMID: 26852148.
Solubility and dimensional change after setting of root canal sealers: a proposal for smaller dimensions of test samples. Carvalho-Junior JR, Correr-Sobrinho L, Correr AB, Sinhoreti MA, Consani S, Sousa-Neto MD. J Endod. 2007;33(9):1110-1116. PMID: 17931945.
Effects of the addition of nanoparticulate calcium carbonate on setting time, dimensional change, compressive strength, solubility and pH of MTA. Bernardi A, Bortoluzzi EA, Felippe WT, Felippe MC, Wan WS, Teixeira CS. Int Endod J. 2017;50(1):97-105. PMID: 26659859.
A laboratory evaluation of cell viability, radiopacity and tooth discoloration induced by regenerative endodontic materials. Oliveira LV, da Silva GR, Souza GL, Magalhães TEA, Barbosa GLR, Turrioni AP. Int Endod J. 2020; 53:1140-1152. PMID: 32299123.
Color stability of teeth restored with biodentine: A 6-month in vitro study. Vallés M, Roig M, Duran-Sindreu F, Martínez S, Mercadé M. J Endod. 2015; 41:1157-1160. PMID: 25937179.
Spectrophotometric Analysis of Coronal Tooth Discoloration Induced by Tricalcium Silicate Cements in the Presence of Blood. Chen SJ, Karabucak B, Steffen JJ, Yu YH, Kohli MR. J Endod. 2020;46(12):1913–9. PMID : 32949559.
Solubility of Root-end-Filling Materials: A Comparative Study. Poggio C, Lombardini M, Alessandro C, Simonetta R. J Endod. 2007;33(9):1094–7. PMID: 17931941.
Changes in the surface of four calcium silicate-containing endodontic materials and an epoxy resin-based sealer after a solubility test. Borges RP, Sousa-Neto MD, Versiani MA, Rached-Júnior FA, De-Deus G, Miranda CES. Int Endod J. 2012; 45:419-428. PMID: 22150403.
Nucleophilic effects on the deprotonation of phenol radical cations. Chem Phys Lett. 2001; 337:335-340.
A comparative study of the physicochemical properties of hesperidin, MTA-Angelus and calcium hydroxide as pulp capping materials. Abo El-Mal EO, Abu-Seida AM, El Ashry SH. Saudi Dent J. 2019; 31: 219-227. PMID: 30983832.
Antimicrobial Activity and pH of Calcium Hydroxide and Zinc Oxide Nanoparticles Intracanal Medication and Association with Chlorhexidine. Aguiar AS, Guerreiro-Tanomaru JM, Faria G, Leonardo RT, Tanomaru-Filho M. J Contemp Dent Pract. 2015; 16:624-629. PMID: 26423497.
Physical evaluation of a new pulp capping material developed from Portland cement. Negm A, Hassanien E, Abu-Seida AM, Nagy M. J Clin Exper Dent. 2016; 8, e278–e283. PMID: 27398178.
Influence of powder-to-water ratio on radiopacity, setting time, pH, calcium ion release and micro-CT volumetric solubility of white mineral trioxide aggregate. Cavenago BC, Pereira TC, Duarte MAH. Int Endod J. 2014; 47:120-126. PMID: 23647286.
Radiopacity of Portland cement associated with different radiopacifying agents. Húngaro Duarte MA, de Oliveira El Kadre GD ar, Vivan RR, Guerreiro Tanomaru JM, Filho MT, de Moraes IG. J Endod. 2009; 35:737-740. PMID: 19410095.
Radiopacity of root filling materials using digital radiography. Carvalho-Junior JR, Correr-Sobrinho L, Correr AB, Sinhoreti MAC, Consani S, Sousa-Neto MD. Int Endod J. 2007; 40 :514-520. PMID: 17511790.
Mineral trioxide aggregate enriched with iron disulfide nanostructures: an evaluation of their physical and biological properties. Argueta-Figueroa L, Delgado-García JJ, García-Contreras R. Eur J Oral Sci. 2018; 126:234-243. PMID: 29442393.
Comparison of the physical and mechanical properties of MTA and portland cement. Islam I, Kheng Chng H, Jin Yap AU. J Endod. 2006; 32:193-197. PMID: 16500224.
Effect of zirconium oxide and zinc oxide nanoparticles on physicochemical properties and antibiofilm activity of a calcium silicate-based material. Guerreiro-Tanomaru JM, Trindade-Junior A, Costa BC. Sci World J. 2014: Article ID 975213. PMID: 25431798.
Color stability of white mineral trioxide aggregate. Vallés M, Mercadé M, Duran-Sindreu F, Bourdelande JL, Roig M. Clin Oral Investig. 2013; 17:1155-1159. PMID: 22814761.
Does Modification of Amalgomer with Propolis Alter Its Physicomechanical Properties? An In Vitro Study. Abdallah Abdallah RM, Abdelghany AM, Aref NS. Int J Biomater. 2020;2020:3180879. PMID: 32454828.
Whitening effect and morphological evaluation of hydroxyapatite materials. Dabanoglu A, Wood C, García-Godoy F, Kunzelmann KH. Am J Dent. 2009; 22:23-29. PMID: 19281109.
##submission.downloads##
出版済
巻号
セクション
##submission.license##
##submission.copyrightStatement##
##submission.license.cc.by4.footer##Authors who publish with this journal agree to the following terms:
- The Author retains copyright in the Work, where the term “Work” shall include all digital objects that may result in subsequent electronic publication or distribution.
- Upon acceptance of the Work, the author shall grant to the Publisher the right of first publication of the Work.
- The Author shall grant to the Publisher and its agents the nonexclusive perpetual right and license to publish, archive, and make accessible the Work in whole or in part in all forms of media now or hereafter known under a Creative Commons Attribution 4.0 International License or its equivalent, which, for the avoidance of doubt, allows others to copy, distribute, and transmit the Work under the following conditions:
- Attribution—other users must attribute the Work in the manner specified by the author as indicated on the journal Web site;
- The Author is able to enter into separate, additional contractual arrangements for the nonexclusive distribution of the journal's published version of the Work (e.g., post it to an institutional repository or publish it in a book), as long as there is provided in the document an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post online a prepublication manuscript (but not the Publisher’s final formatted PDF version of the Work) in institutional repositories or on their Websites prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work. Any such posting made before acceptance and publication of the Work shall be updated upon publication to include a reference to the Publisher-assigned DOI (Digital Object Identifier) and a link to the online abstract for the final published Work in the Journal.
- Upon Publisher’s request, the Author agrees to furnish promptly to Publisher, at the Author’s own expense, written evidence of the permissions, licenses, and consents for use of third-party material included within the Work, except as determined by Publisher to be covered by the principles of Fair Use.
- The Author represents and warrants that:
- the Work is the Author’s original work;
- the Author has not transferred, and will not transfer, exclusive rights in the Work to any third party;
- the Work is not pending review or under consideration by another publisher;
- the Work has not previously been published;
- the Work contains no misrepresentation or infringement of the Work or property of other authors or third parties; and
- the Work contains no libel, invasion of privacy, or other unlawful matter.
- The Author agrees to indemnify and hold Publisher harmless from Author’s breach of the representations and warranties contained in Paragraph 6 above, as well as any claim or proceeding relating to Publisher’s use and publication of any content contained in the Work, including third-party content.
Revised 7/16/2018. Revision Description: Removed outdated link.