Dental Wax and Surface Hardness of Refractory Materials

Autores/as

  • Ihab Nafea Yaseen
  • Nidhal Sahib Mansoor college of health and medical techniques
  • Rasha Mohammed Zwyyer
  • Shurooq Falih Altaie

DOI:

https://doi.org/10.5195/d3000.2026.1335

Palabras clave:

Phosphate, Surface Hardness, Palm Wax, Beeswax, Candelilla Wax

Resumen

The purpose of this study was to assess the effect of three different types of natural dental waxes (beeswax, palm wax, and candelilla wax) on the surface hardness of a phosphate-bonded refractory material. Twenty specimens of a phosphate-bonded investment material were made and divided randomly into four groups (n=5). Group 1 received no treatment and served as the control. Groups 2, 3, and 4 were exposed to the surface treatment by dipping in melted beeswax, palm wax, and candelilla wax, respectively. The surface hardness of all samples was measured using a Shore D hardness tester. The results were analyzed by one-way analysis of variance (ANOVA). All three dental waxes showed non-significant differences in surface hardness when compared to the control group. The highest hardness value was determined in the palm wax group (106 ± 4.9), which was significantly higher than that obtained for the other groups. Within the limitations of this experimental in-vitro study, the use of natural dental waxes can be considered as an effective surface-hardness improving technique for phosphate-bonded investment materials. Palm wax was the best enhancement agent, indicating that it could be used as a simple and inexpensive means of improving the quality of investment molds in dental laboratories.

Descargas

Publicado

2026-06-03

Número

Vol. 14 Núm. 1 (2026)

Sección

Adults & the Elderly

Licencia

Derechos de autor 2026 Ihab Nafea Yaseen, Nidhal Sahib Mansoor, Rasha Mohammed Zwyyer, Shurooq Falih Altaie

Creative Commons License

Esta obra está bajo una licencia internacional Creative Commons Atribución 4.0.

Authors who publish with this journal agree to the following terms:

  1. The Author retains copyright in the Work, where the term “Work” shall include all digital objects that may result in subsequent electronic publication or distribution.
  2. Upon acceptance of the Work, the author shall grant to the Publisher the right of first publication of the Work.
  3. The Author shall grant to the Publisher and its agents the nonexclusive perpetual right and license to publish, archive, and make accessible the Work in whole or in part in all forms of media now or hereafter known under a Creative Commons Attribution 4.0 International License or its equivalent, which, for the avoidance of doubt, allows others to copy, distribute, and transmit the Work under the following conditions:
    1. Attribution—other users must attribute the Work in the manner specified by the author as indicated on the journal Web site;
    with the understanding that the above condition can be waived with permission from the Author and that where the Work or any of its elements is in the public domain under applicable law, that status is in no way affected by the license.
  4. The Author is able to enter into separate, additional contractual arrangements for the nonexclusive distribution of the journal's published version of the Work (e.g., post it to an institutional repository or publish it in a book), as long as there is provided in the document an acknowledgement of its initial publication in this journal.
  5. Authors are permitted and encouraged to post online a prepublication manuscript (but not the Publisher’s final formatted PDF version of the Work) in institutional repositories or on their Websites prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work. Any such posting made before acceptance and publication of the Work shall be updated upon publication to include a reference to the Publisher-assigned DOI (Digital Object Identifier) and a link to the online abstract for the final published Work in the Journal.
  6. Upon Publisher’s request, the Author agrees to furnish promptly to Publisher, at the Author’s own expense, written evidence of the permissions, licenses, and consents for use of third-party material included within the Work, except as determined by Publisher to be covered by the principles of Fair Use.
  7. The Author represents and warrants that:
    1. the Work is the Author’s original work;
    2. the Author has not transferred, and will not transfer, exclusive rights in the Work to any third party;
    3. the Work is not pending review or under consideration by another publisher;
    4. the Work has not previously been published;
    5. the Work contains no misrepresentation or infringement of the Work or property of other authors or third parties; and
    6. the Work contains no libel, invasion of privacy, or other unlawful matter.
  8. The Author agrees to indemnify and hold Publisher harmless from Author’s breach of the representations and warranties contained in Paragraph 6 above, as well as any claim or proceeding relating to Publisher’s use and publication of any content contained in the Work, including third-party content.

Revised 7/16/2018. Revision Description: Removed outdated link.