Antimicrobial Efficiency of Hypochlorous Acid Incorporation and its Effect on Surface Properties of Irreversible Hydrocolloid Materials
DOI:
https://doi.org/10.5195/d3000.2024.726Λέξεις-κλειδιά:
antimicrobial efficiency, hypochlorous acid, incorporation, irreversible hydrocolloid, self disinfectingΠερίληψη
Objective: Conventional approaches for disinfection, including spraying and immersion, resulted in only surface disinfection of impressions. As a result, self-disinfecting impression materials incorporated with antimicrobial compounds require more extensive studies. The incorporation of a disinfectant into irreversible hydrocolloid impression materials could eliminate the need for the disinfection step by conventional approaches, including spraying and immersion which only result in surface disinfection of impressions. The study was aimed to investigate the effect of incorporation of hypochlorous acid in irreversible hydrocolloid materials on antimicrobial efficiency, detail reproduction, and dimensional stability.
Materials and Methods: Hypochlorous acid (HOCl) was used in two concentrations, 100 ppm and 200 ppm, and mixed with alginate powder to compare with the control group (distilled water mixed with alginate). Candida albicans, Staphylococcus aureus, and Pseudomonas aeruginosawere chosen for assessing the antimicrobial activity with the disk diffusion test. In addition, the dimensional stability and reproduction of details were tested.
Results: The results revealed that both HOCl concentrations of 100 ppm and 200 ppm imposed significant antimicrobial activity against all three tested microorganisms. There was no significant difference regarding reproduction of details, but the addition of the antimicrobial had a significant adverse effect on the alginate’s dimensional stability.
Conclusion: It may be concluded that the incorporation of HOCL into irreversible hydrocolloid impression material resulted in an impression with antimicrobial activity. In addition, there was no effect on the impression materials ability to reproduce surface details, but the antimicrobial addition may affect its dimensional stability.
Αναφορές
Environmental Disinfection of a Dental Clinic during the Covid-19 Pandemic: A Narrative Insight. Scarano A, Inchingolo F, and Lorusso F.Biomed Res Int. 2020:8896812. DOI: 10.1155/2020/8896812. PMID:33145359.
Recommendations for Infection Control in Dental Laboratories During Covid-19 Pandemic and Normalization Period. Basmacı F, Kilicarslan M, and ŞEnel F.Journal of Basic and Clinical Health Sciences. 2021 Mar;5. DOI: 10.30621/jbachs.862910.
The effect of water and sodium hypochlorite disinfection on alginate impressions. Correia-Sousa J, Tabaio A, Silva A, Pereira T, Sampaio-Maia B, and Vasconcelos M.Revista Portuguesa de Estomatologia, Medicina Dentária e Cirurgia Maxilofacial. 2013 Mar;54:8–12. DOI: 10.1016/j.rpemd.2012.12.003.
The Effect of Hypochlorous Acid Disinfectant on the Reproduction of Details and Surface Hardness of Type III Dental Stone. Jasim ZM and Abass SM.Cureus. 2022 Nov;14(11):e32061. DOI: 10.7759/cureus.32061. PMID:36600860.
The Effect of Three Different Disinfection Materials on Alginate Impression by Spray Method. Badrian H, Ghasemi E, Khalighinejad N, and Hosseini N.ISRN Dentistry. 2012 Jul;2012:695151. DOI: 10.5402/2012/695151.
Disinfection of dental impression materials and its effects on dimensional changes: a literature review. Dapello-Zevallos GM, San Miguel-Ramírez KNM, Febre-Cuibin KS, Gutiérrez-Obando DA, and Tinedo-López PL.Revista Odontológica Mexicana. 2022 ;25(2):154-159.
Effects of Various Disinfection Methods on the Material Properties of Silicone Dental Impressions of Different Types and Viscosities. Wezgowiec J, Paradowska-Stolarz A, Malysa A, Orzeszek S, Seweryn P, and Wieckiewicz M.International Journal of Molecular Sciences. 2022 ;23(18):10859. DOI:10.3390/ijms231810859.
Evaluating The Effect Of Propolis On Surface Roughness And Wettability Properties Of The Addition Silicon Impression Material. Anooz N and Abass S.Kufa Medical Journal. 2023 Jun;19:86-94. DOI: 10.36330/kmj.v19i1.12105.
Effect of Disinfection with Hypochlorous Acid on Wettability and Surface Roughness of Polyether Impression Material. kadhim HAA and Abass SM.Journal of Medicinal and Chemical Sciences. 2023 ;6(5):938-945. DOI: 10.26655/jmchemsci.2023.5.1.
A comparative study between microwave irradiation and sodium hypochlorite chemical disinfection: a prosthodontic view. Goel K, Gupta R, Solanki J, and Nayak M.J Clin Diagn Res. 2014 Apr;8(4):Zc42-6. DOI: 10.7860/jcdr/2014/8578.4274. PMID:24959515.
Surface roughness of polyvinyl siloxane impression materials following chemical disinfection, autoclave and microwave sterilization. Al Kheraif AA.J Contemp Dent Pract. 2013 May;14(3):483-7. DOI: 10.5005/jp-journals-10024-1349. PMID:24171994.
Carriage of oral flora on irreversible hydrocolloid and elastomeric impression materials. Samaranayake LP, Hunjan M, and Jennings KJ.J Prosthet Dent. 1991 Feb;65(2):244-9. DOI: 10.1016/0022-3913(91)90169-w. PMID:2051359.
Efficacy of different disinfectant systems on alginate and addition silicone impression materials of Indian and international origin: a comparative evaluation. Samra RK and Bhide SV.J Indian Prosthodont Soc. 2010 Sep;10(3):182-9. DOI: 10.1007/s13191-010-0040-y. PMID:21886411.
Disinfection efficacy of sodium hypochlorite and glutaraldehyde and their effects on the dimensional stability and surface properties of dental impressions: a systematic review. Qiu Y, Xu J, Xu Y, Shi Z, Wang Y, Zhang L, et al.PeerJ. 2023 ;11:e14868. DOI: 10.7717/peerj.14868. PMID:36846444.
Electrolyzed Water as a Novel Sanitizer in the Food Industry: Current Trends and Future Perspectives. Rahman S, Khan I, and Oh DH.Compr Rev Food Sci Food Saf. 2016 May;15(3):471-490. DOI: 10.1111/1541-4337.12200. PMID:33401818.
Evaluation of liquid- and fog-based application of Sterilox hypochlorous acid solution for surface inactivation of human norovirus. Park GW, Boston DM, Kase JA, Sampson MN, and Sobsey MD.Appl Environ Microbiol. 2007 Jul;73(14):4463-8. DOI: 10.1128/aem.02839-06. PMID:17483283.
Sarada BV, Vijay R, Johnson R, Rao TN, and Padmanabham G, Fight Against COVID-19: ARCI’s Technologies for Disinfection. Trans Indian Natl. Acad. Eng. 2020;5(2):349-54. DOI: 10.1007/s41403-020-00153-3.
Hypochlorous acid as a potential wound care agent: part I. Stabilized hypochlorous acid: a component of the inorganic armamentarium of innate immunity. Wang L, Bassiri M, Najafi R, Najafi K, Yang J, Khosrovi B, et al.J Burns Wounds. 2007 Apr ;6:e5. PMID:17492050.
Taurine chloramine produced from taurine under inflammation provides anti-inflammatory and cytoprotective effects. Kim C and Cha YN.Amino Acids. 2014 Jan;46(1):89-100. DOI: 10.1007/s00726-013-1545-6. PMID:23933994.
Antimicrobial Efficiency of Hypochlorous Acid and Its Effect on Some Properties of Alginate Impression Material. Khalaf B, Abass S, Al-Khafaji A, and Issa M.Int J Dent. 2023 Nov;2023:1-7. DOI: 10.1155/2023/8584875.
Dental Impression Materials and Techniques. Punj A, Bompolaki D, and Garaicoa J.Dent Clin North Am. 2017 Oct;61(4):779-796. DOI: 10.1016/j.cden.2017.06.004. PMID:28886768.
Effectiveness of Disinfectants on Antimicrobial and Physical Properties of Dental Impression Materials. Demajo JK, Cassar V, Farrugia C, Millan-Sango D, Sammut C, Valdramidis V, et al.Int J Prosthodont. 2016 Jan-Feb;29(1):63-7. DOI: 10.11607/ijp.4358. PMID:26757331.
Guidelines for infection control in dental health care settings--2003. Kohn WG, Harte JA, Malvitz DM, Collins AS, Cleveland JL, and Eklund KJ.J Am Dent Assoc. 2004 Jan;135(1):33-47. DOI: 10.14219/jada.archive.2004.0019. PMID:14959873.
Antimicrobial Efficacy of Irreversible Hydrocolloid Impression Impregnated with Silver Nanoparticles Compared to Surface Disinfected Impressions - An In vivo Study. Rajendran V, Suma K, Ali SA, Karthigeyan R, and Kalarani G.J Pharm Bioallied Sci. 2021 Jun;13(Suppl 1):S532-s536. DOI: 10.4103/jpbs.JPBS_565_20. PMID:34447148.
The Efficacy of Three Types of Disinfectants on the Microbial Flora from the Surface of Impression Materials Used in Dentistry—In Vitro Study. Cerghizan D, Jánosi KM, Ciurea CN, Popelea O, Baloș MD, Crăciun AE, et al.Appl. Sci. 2023 ;13(2):1097. DOI:10.3390/app13021097.
Identification and Antifungal Susceptibility Testing of Candida Species: A Comparison of Vitek-2 System with Conventional and Molecular Methods. Kaur R, Dhakad MS, Goyal R, Haque A, and Mukhopadhyay G.J Glob Infect Dis. 2016 Oct-Dec;8(4):139-146. DOI: 10.4103/0974-777x.192969. PMID:27942193.
Evaluation of the VITEK 2 system for identification and antimicrobial susceptibility testing of medically relevant gram-positive cocci. Ligozzi M, Bernini C, Bonora MG, De Fatima M, Zuliani J, and Fontana R.J Clin Microbiol. 2002 May;40(5):1681-6. DOI: 10.1128/jcm.40.5.1681-1686.2002. PMID:11980942.
Performance of TDR-300B and VITEK®2 for the identification of Pseudomonas aeruginosa in comparison with VITEK®-MS. Moehario LH, Tjoa E, Putranata H, Joon S, Edbert D, and Robertus T.Journal of International Medical Research. 2021 Feb;49(2):0300060521989893. DOI: 10.1177/0300060521989893.
Comparison of antimicrobial activities and compressive strength of alginate impression materials following disinfection procedure. Alwahab Z.J Contemp Dent Pract. 2012 Jul;13(4):431-5. DOI: 10.5005/jp-journals-10024-1163. PMID:23151687.
Organization. IS, Specification for alginate impression material-1563. 1990, Geneve: ISO.
Surface Detail Reproduction and Dimensional Stability of Contemporary Irreversible Hydrocolloid Alternatives after Immediate and Delayed Pouring. Kusugal P, Chourasiya RS, Ruttonji Z, Astagi P, Nayak AK, and Patil A.Contemp Clin Dent. 2018 Jan-Mar;9(1):20-25. DOI: 10.4103/ccd.ccd_676_17. PMID:29599578.
The effect of disinfectants on the properties of dental gypsum: 1. Mechanical properties. Abdelaziz KM, Combe EC, and Hodges JS.J Prosthodont. 2002 Sep;11(3):161-7. PMID:12237796.
The effect of addition of calcium hypochlorite disinfectant on some physical and mechanical properties of dental stone. Abass SM and Ibrahim IK.Scientific Journal Published by the College of Dentistry–University of Baghdad. 2012:36.
The effect of SOLO and sodium hypochlorite disinfectant on some properties of different types of dental stone. Al-khafaji AM, Abass SM, and Khalaf BS.J Bagh Coll Dent. 2013 Jun;25(2):8-17.
Efficiency of different denture disinfection methods. Mahmood MA, Khalaf BS, and Abass SM.Global J Bio-sci Biotech. 2017 ;6:439-4.
Effect of Disinfection with Hypochlorous Acid on Compatibility with impression materials of type III dental Stone. Nasser AA and Abass SM.(Humanities, social and applied sciences) Misan Journal of Academic Studies. 2023 ;22(47):339-347.
Influence of Hypochlorous acid on Surface Roughness and Wettability of Addition Silicon Impression Material. Mohammed MJ and Abass SM.The Egyptian Journal of Hospital Medicine. 2023 ;90(2):3630-3635.
Effect of microwave disinfection on some properties of gypsum products. Abass SM.J Bagh Coll Dent. 2009 ;21(3):47-52.
Evaluation of Efficacy and Properties of Irreversible Hydrocolloid Impression Material when Mixed with various Antimicrobial Agents. Ravishankar Y, Himashilpa G, Srinivas K, Sunitha D, Modalavalasa H, and Kumar TS.International Journal of Translational Medical Research and Public Health. 2019 Jul;6:27-31.
Effect of sodium fluoride addition as a disinfectant on some properties of alginate impression material. Hussian AM and Jassim Rk.J Bagh Coll Dent. 2015 Mar;27(1):70-76.
Hypochlorous Acid: A Review. Block MS and Rowan BG.J Oral Maxillofac Surg. 2020 Sep;78(9):1461-1466. DOI: 10.1016/j.joms.2020.06.029. PMID:32653307.
Status Report on Topical Hypochlorous Acid: Clinical Relevance of Specific Formulations, Potential Modes of Action, and Study Outcomes. Del Rosso JQ and Bhatia N.J Clin Aesthet Dermatol. 2018 Nov;11(11):36-39. PMID:30588272.
Hypochlorous Acid: an ideal wound care agent with powerful microbicidal, antibiofilm, and wound healing potency. Sakarya S, Gunay N, Karakulak M, Ozturk B, and Ertugrul B.Wounds. 2014 Dec;26(12):342-50. PMID:25785777.
Redox reactions and microbial killing in the neutrophil phagosome. Winterbourn CC and Kettle AJ.Antioxid Redox Signal. 2013 Feb;18(6):642-60.DOI: 10.1089/ars.2012.4827. PMID:22881869.
Hypochlorous acid and taurine-N-monochloramine in periodontal diseases. Mainnemare A, Mégarbane B, Soueidan A, Daniel A, and Chapple IL.J Dent Res. 2004 Nov;83(11):823-31. DOI: 10.1177/154405910408301101. PMID:15505230.
Reaction of hemoglobin with HOCl: mechanism of heme destruction and free iron release. Maitra D, Byun J, Andreana PR, Abdulhamid I, Diamond MP, Saed GM, et al.Free Radic Biol Med. 2011 Jul;51(2):374-86. DOI: 10.1016/j.freeradbiomed.2011.04.011. PMID:21549834.
Effectiveness of Hypochlorous Acid to Reduce the Biofilms on Titanium Alloy Surfaces in Vitro. Chen CJ, Chen CC, and Ding SJ.Int J Mol Sci. 2016 Jul;17(7). DOI: 10.3390/ijms17071161. PMID:27447617.
A self-disinfecting irreversible hydrocolloid impression material mixed with povidone iodine powder. Ismail HA, Asfour H, and Shikho SA.Eur J Dent. 2016 Oct-Dec;10(4):507-511. DOI: 10.4103/1305-7456.195172. PMID:28042266.
Restorative dental materials. Craig RG and Ward M.Saunders co. 10th edi. 1997:77-83
Disinfection procedures: their efficacy and effect on dimensional accuracy and surface quality of an irreversible hydrocolloid impression material. Rentzia A, Coleman DC, O'Donnell MJ, Dowling AH, and O'Sullivan M.J Dent. 2011 Feb;39(2):133-40. DOI: 10.1016/j.jdent.2010.11.003. PMID:21093528.
A New Method to Evaluate Trueness and Precision of Digital and Conventional Impression Techniques for Complete Dental Arch. Seo K and Kim S.Appl. Sci. 2021 ;11(10):4612. DOI:10.3390/app11104612.
Evaluation of Antibacterial Effect and Dimensional Stability of Self-disinfecting Irreversible Hydrocolloid: An in vitro Study. Benakatti VB, Patil AP, Sajjanar J, Shetye SS, Amasi UN, and Patil R.J Contemp Dent Pract. 2017 Oct;18(10):887-892. DOI: 10.5005/jp-journals-10024-2144. PMID:28989125.
Λήψεις
Δημοσιευμένα
Τεύχος
Ενότητα
Άδεια
Πνευματική ιδιοκτησία (c) 2024 Shorouq M. Abass, Bayan S. Khalaf, Moamin I. Issa, Aseel Mohammed Al-Khafaji
Αυτή η εργασία είναι αδειοδοτημένη υπό το CC Αναφορά Δημιουργού 4.0.
Authors who publish with this journal agree to the following terms:
- The Author retains copyright in the Work, where the term “Work” shall include all digital objects that may result in subsequent electronic publication or distribution.
- Upon acceptance of the Work, the author shall grant to the Publisher the right of first publication of the Work.
- The Author shall grant to the Publisher and its agents the nonexclusive perpetual right and license to publish, archive, and make accessible the Work in whole or in part in all forms of media now or hereafter known under a Creative Commons Attribution 4.0 International License or its equivalent, which, for the avoidance of doubt, allows others to copy, distribute, and transmit the Work under the following conditions:
- Attribution—other users must attribute the Work in the manner specified by the author as indicated on the journal Web site;
- The Author is able to enter into separate, additional contractual arrangements for the nonexclusive distribution of the journal's published version of the Work (e.g., post it to an institutional repository or publish it in a book), as long as there is provided in the document an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post online a prepublication manuscript (but not the Publisher’s final formatted PDF version of the Work) in institutional repositories or on their Websites prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work. Any such posting made before acceptance and publication of the Work shall be updated upon publication to include a reference to the Publisher-assigned DOI (Digital Object Identifier) and a link to the online abstract for the final published Work in the Journal.
- Upon Publisher’s request, the Author agrees to furnish promptly to Publisher, at the Author’s own expense, written evidence of the permissions, licenses, and consents for use of third-party material included within the Work, except as determined by Publisher to be covered by the principles of Fair Use.
- The Author represents and warrants that:
- the Work is the Author’s original work;
- the Author has not transferred, and will not transfer, exclusive rights in the Work to any third party;
- the Work is not pending review or under consideration by another publisher;
- the Work has not previously been published;
- the Work contains no misrepresentation or infringement of the Work or property of other authors or third parties; and
- the Work contains no libel, invasion of privacy, or other unlawful matter.
- The Author agrees to indemnify and hold Publisher harmless from Author’s breach of the representations and warranties contained in Paragraph 6 above, as well as any claim or proceeding relating to Publisher’s use and publication of any content contained in the Work, including third-party content.
Revised 7/16/2018. Revision Description: Removed outdated link.
