Mandible Reconstruction with 3D Printed Models

Συγγραφείς

  • Omar Bakr Hazm
  • Noor Salman Nadhum
  • Alaa Mohammed Shaheed

DOI:

https://doi.org/10.5195/d3000.2024.538

Λέξεις-κλειδιά:

3D printed model, maxillofacial reconstruction, reconstruction plates, ameloblastoma, juvenile fibromatosis, keratocyst, osteosarcoma, vascular malformation

Περίληψη

Background: When surgeons operate under general anesthesia, length of surgery, not only its outcome, matters. In maxillofacial surgery we can reduce the time in reconstructive surgery by using presurgical bended plates in presurgically designed 3D models.

Method: The study measured the mean time to bend the plates preoperatively on a printed three-dimensional model and the capability of the plates to adapt well on the mandible intraoperatively in cases of mandibular reconstruction after partial resection of the mandible due to pathology, such as benign aggressive tumors.

Results and conclusions: The mean time to bend the plates preoperatively was 17 minutes, with rapid adaptation during surgery. This is important in minimizing the time that the wound is exposed to the environment and minimizes the trauma to the surrounding soft tissues. Multiple checks of the plate if bended at time of surgery can increase trauma to the surrounding soft tissues.

The study supports the recommendation of the use of the preoperatively corrected and printed 3D models to prebend the plates pre-operatively. This step should be included as a routine workflow in elective cases, since it is not be possible in cases of emergency or urgency.

 

Αναφορές

Jeroen Liebregts, Frank Baan, Pieter van Lierop, Martien de Koning, Stefaan Bergé, Thomas Maal, Tong Xi. One-year postoperative skeletal stability of 3D planned bimaxillary osteotomies: maxilla-first versus mandible-first surgery. Sci Rep. 2019 Feb 28;9(1):3000.

K Stokbro, E Aagaard, P Torkov, R B Bell, T Thygesen. Virtual planning in orthognathic surgery. Int J Oral Maxillofac Surg. 2014 Aug;43(8):957-65.

Humberto Fernández-Olarte, Andrés Gómez-Delgado, Juan G Gutiérrez-Quintero, Álvaro Rodríguez-Sáenz, Jaime Castro-Núñez. The Morpho-functional 3D Analysis for Zygomatic Implants: A Clinical Tool With Surgical Implications. J Craniofac Surg. 2020 Sep 3.

Ghada Amin Khalifa, Nahed Adly Abd El Moniem, Shadia Abd-ElHameed Elsayed, Yara Qadry. Segmental Mirroring: Does It Eliminate the Need for Intraoperative Readjustment of the Virtually Pre-Bent Reconstruction Plates and Is It Economically Valuable? J Oral Maxillofac Surg. 2016 Mar;74(3):621-30.

Fedorov A., Beichel R., Kalpathy-Cramer J., Finet J., Fillion-Robin J-C., Pujol S., Bauer C., Jennings D., Fennessy F., Sonka M., Buatti J., Aylward S.R., Miller J.V., Pieper S., Kikinis R. 3D Slicer as an Image Computing Platform for the Quantitative Imaging Network. Magnetic Resonance Imaging. 2012 Nov;30(9):1323-41. PMID: 22770690.

Azuma M, Yanagawa T, Ishibashi-Kanno N, Uchida F, Ito T, Yamagata K, Hasegawa S, Sasaki K, Adachi K, Tabuchi K, Sekido M, Bukawa H. Mandibular reconstruction using plates prebent to fit rapid prototyping 3-dimensional printing models ameliorates contour deformity. Head Face Med. 2014 Oct 23;10:45.

Cohen A, Laviv A, Berman P, Nashef R, Abu-Tair J. Mandibular reconstruction using stereolithographic 3-dimensional printing modeling technology. Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 2009 Nov;108(5):661-6.

E Bradley Strong, Scott C Fuller, David F Wiley, Janina Zumbansen, M D Wilson, Marc C Metzger. Preformed vs intraoperative bending of titanium mesh for orbital reconstruction. Otolaryngol Head Neck Surg. 2013 Jul;149(1):60-6.

Λήψεις

Δημοσιευμένα

2024-02-13

Τεύχος

Ενότητα

Development of Craniofacial Structures