Influence of Silver Diamine Fluoride and Potassium Iodine Pretreatment on Bond Durability, Nanoleakage, and Interfacial Integrity of Universal Adhesives to Caries-Affected Dentin

Autoři

  • Mustafa Raheem Hilal College of Dentistry, University of Al-Maarif, Al-Anbar, Iraq.
  • Noor Hasan Abed College of Dentistry, Al-Bayan University, Baghdad, Iraq.
  • Abdulrahman Zaid Al-Najjar Department of Dental Basic Science, College of Dentistry, Gilgamesh University, Baghdad, Iraq.
  • Yaqoob Yousif Kadhim Al-Mahmoudiya Specialized Center for Dentistry, Baghdad, Iraq.
  • Faehaa Azhar Al-Mashhadane Department of Dental Basic Sciences, College of Dentistry, University of Mosul, Mosul, Iraq.
  • Manar Emad Ahmed Department of Dental Basic Science, College of Dentistry, Gilgamesh University, Baghdad, Iraq.
  • Noor Mohammed Saqee Al-Karkh Health Directorate, Ministry of Health, Baghdad, Iraq

DOI:

https://doi.org/10.5195/d3000.2026.1579

Klíčová slova:

Fluoride, Silver Diamine Fluoride, Dental Caries, Prevention

Abstrakt

Although silver diamine fluoride (SDF) has been widely applied to arrest dentinal caries, the precipitates generated after application may negatively affect the ability of the fluoride to bond to the tooth. The use of potassium iodide (KI) may be useful in minimizing SDF discoloration, while its effects on the longevity of universal adhesives are not yet known. This in vitro study aimed to assess the immediate and aged bond strength, nanoleakage, and failure-mode distribution of two universal adhesives bonded to caries-affected dentin with or without SDF followed by KI. The total of 120 extracted permanent teeth were used to create standardized artificial caries-affected dentin. The specimens were randomly divided into three dentin pretreatment groups: the control group (C), the 38% SDF group (A), and the 38% SDF followed by KI group (B). Each group was subdivided based on the type of universal adhesive used (Scotchbond Universal Plus vs. Clearfil Universal Bond Quick). The specimens were either examined immediately after composite build-up or after 10,000 thermal cycles plus six months of water storage. The microtensile bond strength (µTBS), nanoleakage and failure-mode distribution were evaluated. Linear mixed-effects models were used to control for clustering of beams within teeth and p < 0.05 was used as the threshold for significance. The SDF significantly reduced immediate and aged µTBS and increased nanoleakage (p < 0.001) compared to untreated caries-affected dentin. The application of KI after SDF significantly increased bond strength and decreased nanoleakage compared with SDF alone (p < 0.05); however, neither outcome returned to the values observed in the untreated control groups. The bond strength was significantly diminished and the nanoleakage was significantly increased in all groups after artificial aging, the most in the SDF-only groups. The number of adhesive failures was also higher after SDF treatment, especially after aging. The overall performance of Clearfil Universal Bond Quick was just slightly better than Scotchbond Universal Plus. Pretreatment with SDF had a negative impact on the durability of the universal adhesive bonding to caries-affected dentin. These negative effects were partially mitigated but not fully restored by applying KI immediately after SDF, and the bonding performance was not restored to the level of that in the untreated dentin. Therefore, adequate surface management should be considered prior to the placement of adhesive composite restorations after SDF.

Reference

Bhardwaj, S., Kaur, H., & Choudhary, R. (2025). Effect of silver diamine fluoride and potassium iodide application on the microhardness and shear bond strength of resin composite to enamel and dentin: An in vitro study. Indian Journal of Dental Research, 36(2), 202–206. https://doi.org/10.4103/ijdr.ijdr_515_23

Biswas, S., Koti, A., Kumar, H., Kotnoor, S. S., Jain, A., Jaiswal, K., & Surana, P. (2024). Effect of silver diamine fluoride and potassium iodide on shear bond strength for glass ionomer cement to primary dentine. Bioinformation, 20(7), 808–811. https://doi.org/10.6026/973206300200808

Farahat, F., Davari, A., & Karami, H. (2022). Investigation of the effect of simultaneous use of silver diamine fluoride and potassium iodide on the shear bond strength of total-etch and universal adhesive systems to dentin. Dental Research Journal, 19, Article 6. https://doi.org/10.4103/1735-3327.336691

Follak, A. C., Miotti, L. L., Lenzi, T. L., Rocha, R. O., & Soares, F. Z. M. (2021). Self-etch approach of universal adhesives as an alternative to minimize bond degradation on sound dentin versus caries-affected dentin over time. The Journal of Adhesive Dentistry, 23(3), 243–252. https://doi.org/10.3290/j.jad.b1367889

Fröhlich, T. T., Rocha, R. O., & Botton, G. (2020). Does previous application of silver diammine fluoride influence the bond strength of glass ionomer cement and adhesive systems to dentin? A systematic review and meta-analysis. International Journal of Paediatric Dentistry, 30(1), 85–95. https://doi.org/10.1111/ipd.12571

Jiang, C. M., Mei, M. L., Wong, M. C. M., Chu, C. H., & Lo, E. C. M. (2020). Effect of silver diamine fluoride solution application on the bond strength of dentine to adhesives and to glass ionomer cements: A systematic review. BMC Oral Health, 20, Article 40. https://doi.org/10.1186/s12903-020-1030-z

Khataminia, M., Emami, A., & Basir, L. (2025). Evaluation of the effect of silver diamine fluoride treatment with and without glutathione and potassium iodide on the micro-shear bond strength of composite resin to primary tooth dentin. Galen Medical Journal, 14(SP1), Article e3898. https://doi.org/10.31661/gmj.vi.3898

Knight, G. M., McIntyre, J. M., & Mulyani. (2006). The effect of silver fluoride and potassium iodide on the bond strength of auto-cure glass ionomer cement to dentine. Australian Dental Journal, 51(1), 42–45. https://doi.org/10.1111/j.1834-7819.2006.tb00399.x

Ko, A. K., Matsui, N., Nakamoto, A., Ikeda, M., Nikaido, T., Burrow, M. F., & Tagami, J. (2020). Effect of silver diammine fluoride application on dentin bonding performance. Dental Materials Journal, 39(3), 407–414. https://doi.org/10.4012/dmj.2019-057

Koizumi, H., Hamama, H. H., & Burrow, M. F. (2016). Effect of a silver diamine fluoride and potassium iodide-based desensitizing and cavity-cleaning agent on bond strength to dentine. International Journal of Adhesion and Adhesives, 68, 54–61. https://doi.org/10.1016/j.ijadhadh.2016.02.008

Lutgen, P., Chan, D., & Sadr, A. (2018). Effects of silver diammine fluoride on bond strength of adhesives to sound dentin. Dental Materials Journal, 37(6), 1003–1009. https://doi.org/10.4012/dmj.2017-401

Markham, M. D., Tsujimoto, A., Barkmeier, W. W., Jurado, C. A., Fischer, N. G., Watanabe, H., Baruth, A. G., Latta, M. A., & Garcia-Godoy, F. (2020). Influence of 38% silver diamine fluoride application on bond stability to enamel and dentin using universal adhesives in self-etch mode. European Journal of Oral Sciences, 128(4), 354–360. https://doi.org/10.1111/eos.12701

Mei, M. L., Ito, L., Cao, Y., Li, Q. L., Chu, C. H., & Lo, E. C. M. (2014). The inhibitory effects of silver diamine fluorides on cysteine cathepsins. Journal of Dentistry, 42(3), 329–335. https://doi.org/10.1016/j.jdent.2013.11.018

Mei, M. L., Li, Q. L., Chu, C. H., Yiu, C. K. Y., & Lo, E. C. M. (2012). The inhibitory effects of silver diamine fluoride at different concentrations on matrix metalloproteinases. Dental Materials, 28(8), 903–908. https://doi.org/10.1016/j.dental.2012.04.011

Mohammed, N. Y., Abdel-Ghany, D. M., Ben Hamadi, N., Özdemir, S., Selamoglu, Z., Plavan, G., Boufahja, F., & Elassar, D. M. (2024). The impact of silver diamine fluoride only or simultaneously with potassium iodide treatment on the bond durability of resin composite material on primary teeth. Cureus, 16(3), Article e57064. https://doi.org/10.7759/cureus.57064

Priya, D., Karale, R., Prashanth, B. R., Raj, A., & Heggade, K. N. V. (2022). Effect of silver diamine fluoride, potassium iodide, and glutathione on micro-shear bond strength of glass ionomer cement to caries-affected dentine. Journal of the Indian Society of Pedodontics and Preventive Dentistry, 40(1), 62–66. https://doi.org/10.4103/jisppd.jisppd_96_21

Schwendicke, F., Frencken, J. E., Bjørndal, L., Maltz, M., Manton, D. J., Ricketts, D., Van Landuyt, K., Banerjee, A., Campus, G., Doméjean, S., Fontana, M., Leal, S., Lo, E., Machiulskiene, V., Schulte, A., Splieth, C., Zandona, A. F., & Innes, N. P. T. (2016). Managing carious lesions: Consensus recommendations on carious tissue removal. Advances in Dental Research, 28(2), 58–67. https://doi.org/10.1177/0022034516639271

Seifo, N., Cassie, H., Radford, J. R., & Innes, N. P. T. (2019). Silver diamine fluoride for managing carious lesions: An umbrella review. BMC Oral Health, 19, Article 145. https://doi.org/10.1186/s12903-019-0830-5

Salih, H. M., Akram, Z. M., & Al-Najjar, A. Z. (2025). Effect of chlorhexidine on various dental implant surface types: Comparative analysis of ion release and corrosion in an in vitro surgical model. Bulletin of Stomatology and Maxillofacial Surgery, 21(7), 407–416. https://doi.org/10.58240/1829006X-2025.21.7-407

Selvaraj, K., Sampath, V., Sujatha, V., & Mahalaxmi, S. (2016). Evaluation of microshear bond strength and nanoleakage of etch-and-rinse and self-etch adhesives to dentin pretreated with silver diamine fluoride/potassium iodide: An in vitro study. Indian Journal of Dental Research, 27(4), 421–425. https://doi.org/10.4103/0970-9290.191893

Siqueira, F. S. F., Morales, L. A. R., Granja, M. C. P., de Melo, B. O., Monteiro-Neto, V., Reis, A., Cardenas, A. F. M., & Loguercio, A. D. (2020). Effect of silver diamine fluoride on the bonding properties to caries-affected dentin. The Journal of Adhesive Dentistry, 22(2), 161–172. https://doi.org/10.3290/j.jad.a44281

Tay, F. R., & Pashley, D. H. (2003). Water treeing—A potential mechanism for degradation of dentin adhesives. American Journal of Dentistry, 16(1), 6–12.

Van Meerbeek, B., Yoshihara, K., Van Landuyt, K., Yoshida, Y., & Peumans, M. (2020). From Buonocore’s pioneering acid-etch technique to self-adhering restoratives: A status perspective of rapidly advancing dental adhesive technology. The Journal of Adhesive Dentistry, 22(1), 7–34. https://doi.org/10.3290/j.jad.a43994

Yoshiyama, M., Tay, F. R., Doi, J., Nishitani, Y., Yamada, T., Itou, K., Carvalho, R. M., Nakajima, M., & Pashley, D. H. (2002). Bonding of self-etch and total-etch adhesives to carious dentin. Journal of Dental Research, 81(8), 556–560. https://doi.org/10.1177/154405910208100811

Zhao, I. S., Chu, S., Yu, O. Y., Mei, M. L., Chu, C. H., & Lo, E. C. M. (2019). Effect of silver diamine fluoride and potassium iodide on shear bond strength of glass ionomer cements to caries-affected dentine. International Dental Journal, 69(5), 341–347. https://doi.org/10.1111/idj.12478

Stahování

Publikováno

2026-09-22

Číslo

Vol 14 No 2 (2026)

Sekce

Development of Craniofacial Structures

Licence

Copyright (c) 2026 Mustafa Raheem Hilal, Noor Hasan Abed, Abdulrahman Zaid Al-Najjar, Yaqoob Yousif Kadhim, Faehaa Azhar Al-Mashhadane, Manar Emad Ahmed, Noor Mohammed Saqee

Creative Commons License

Tato práce je licencována pod Mezinárodní licencí Creative Commons Attribution 4.0 .

Authors who publish with this journal agree to the following terms:

  1. The Author retains copyright in the Work, where the term “Work” shall include all digital objects that may result in subsequent electronic publication or distribution.
  2. Upon acceptance of the Work, the author shall grant to the Publisher the right of first publication of the Work.
  3. The Author shall grant to the Publisher and its agents the nonexclusive perpetual right and license to publish, archive, and make accessible the Work in whole or in part in all forms of media now or hereafter known under a Creative Commons Attribution 4.0 International License or its equivalent, which, for the avoidance of doubt, allows others to copy, distribute, and transmit the Work under the following conditions:
    1. Attribution—other users must attribute the Work in the manner specified by the author as indicated on the journal Web site;
    with the understanding that the above condition can be waived with permission from the Author and that where the Work or any of its elements is in the public domain under applicable law, that status is in no way affected by the license.
  4. The Author is able to enter into separate, additional contractual arrangements for the nonexclusive distribution of the journal's published version of the Work (e.g., post it to an institutional repository or publish it in a book), as long as there is provided in the document an acknowledgement of its initial publication in this journal.
  5. Authors are permitted and encouraged to post online a prepublication manuscript (but not the Publisher’s final formatted PDF version of the Work) in institutional repositories or on their Websites prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work. Any such posting made before acceptance and publication of the Work shall be updated upon publication to include a reference to the Publisher-assigned DOI (Digital Object Identifier) and a link to the online abstract for the final published Work in the Journal.
  6. Upon Publisher’s request, the Author agrees to furnish promptly to Publisher, at the Author’s own expense, written evidence of the permissions, licenses, and consents for use of third-party material included within the Work, except as determined by Publisher to be covered by the principles of Fair Use.
  7. The Author represents and warrants that:
    1. the Work is the Author’s original work;
    2. the Author has not transferred, and will not transfer, exclusive rights in the Work to any third party;
    3. the Work is not pending review or under consideration by another publisher;
    4. the Work has not previously been published;
    5. the Work contains no misrepresentation or infringement of the Work or property of other authors or third parties; and
    6. the Work contains no libel, invasion of privacy, or other unlawful matter.
  8. The Author agrees to indemnify and hold Publisher harmless from Author’s breach of the representations and warranties contained in Paragraph 6 above, as well as any claim or proceeding relating to Publisher’s use and publication of any content contained in the Work, including third-party content.

Revised 7/16/2018. Revision Description: Removed outdated link.