Investigation of surface topography of different root-end filling materials: An in vitro study

著者

##semicolon##

https://doi.org/10.5195/d3000.2019.89

##semicolon##

Surface topography##common.commaListSeparator## root-end filling materials##common.commaListSeparator## retrograde filling

要旨

Aim: Although there are many materials that can be used for retrograde filling in surgical endodontics, none of them can be regarded as an ideal material yet. The purpose of this study was to compare the surface topography of three different root-end filling materials.

Methods: 36 extracted single rooted human incisor teeth were cleaned and decoronated to standardized 10 mm root lengths. The root segments were prepared and 2 mm apical resection were performed. The samples were randomly separeted to three groups (Group A: Ca(OH)2, Group B: MTA Angelus, Group C: ProRoot MTA), each comprised of 12 roots. Materials were placed as 2 mm apical barriers and obturated with guttapercha and AH-Plus sealer. Each group dimidiated two subgroups (A1,A2,B1,B2,C1,C2). Groups A1,B1,C1 were stored in normal saline (NS), groups A2,B2,C2 were stored in neutral phosphate buffer saline (NPBS) solution and samples were incubated at 370C for 2 weeks. Stereomicroscope (32X) was used to photograph the root-end filling.

Results: All specimens demonstrated white crystals formation and sediment over the root-end filling materials and on the superficial border of the root-end cavities’ wall as a white plague. A2,B2,C2 samples have more crystal sediment on root-end fillings than samples A1,B1,C1. Dissolution and corrosion were observed in groups A1, A2.

Conclusions: The results of this study revealed that calcium hydroxide is more resorbable than MTA Angelus and ProRoot MTA. The crystals formation and precipitation were observed in neutral phosphate buffer saline solution was more than normal saline solution for all groups as a hydroxiapatite crystals.  

##submission.citations##

Modern endodontic surgery concepts and practice: a review. Kim S, Kratchman S. J. Endod 2006;32:601–23. PMID: 16793466

Histologic assessment of mineral trioxide aggregate as a root-end filling in monkeys. Torabinejad M, Pitt Ford TR, McKendry DJ, Abedi HR, Miller DA, Kariyawasam SP. J Endod 1997; 23: 225–8. PMID: 9594770

Effect of two storage solutions on surface topography of two root-end fillings. Asgary S, Eghbal MJ, Parirokh M, Ghoddusi J. Australian Endodontic Journal. 2009; 35: 147–152. PMID: 19961453

Comparison of mineral trioxide aggregate and calcium hydroxide for apexification of immature permanent teeth: A systematic review and meta-analysis. Lin JC, Lu JX, Zeng Q, Zhao W, Li WQ, Ling JQ. Journal of the Formosan Medical Association 2016 Jul; 115(7): 523-30. PMID: 26911724

Biointeractivity-related versus chemi/physisorption-related apatite precursor-forming ability of current root end filling materials. Gandolfi MG, Taddei P, Modena E, Siboni F, Prati C. 2013. J Biomed Mater Res Part B 2013;101B:1107–1123. PMID: 23559495

Mineral trioxide aggregate: A comprehensive literature review—Part III: Clinical applications, drawbacks, and mechanism of action. Parirokh M, Torabinejad M. J Endod 2010;36:400–413. PMID: 20171353

Properties of a new root-end filling material. Chong HK, Islam I, Yap AU, Tong YW, Koh ET. J Endod 2005;31:665–8. PMID: 16123702

Johnson BR, Fayad MI, Witherspoon DE. (2011). Periradicular surgery. In: Hargreaves KM, Cohen S, editors. Cohen’s Pathways of the pulp. 10th ed. St. Louis: Mosby;.720-76.

Treatment options: biological basis of regenerative endodontic procedures. Hargreaves KM, Diogenes A, Teixeira FB. Pediatr Dent 2013;35:129-40. PMID: 23635981

Will mineral trioxide aggregate replace calcium hydroxide in treating pulpal and periodontal healing complications subsequent to dental trauma? A review. Bakland LK, Andreasen JO. Dental Traumatology. 2012; 28: 25–32. PMID: 21895969

Apatite formation on bioactive calciumsilicate cements for dentistry affects surface topography and human marrow stromal cells proliferation. Gandolfi MG, Ciapetti G, Taddei P, Perut F, Tinti A, Cardoso M, Van Meerbek B, Prati C. Dent Mater 2010;26: 974–992. PMID: 20655582

Biyoseramik esaslı kök kanal patları: Derleme. Bilgiç A, Bodrumlu E. Atatürk Üniv. Diş Hek. Fak. Derg. 2016; 14:114-17.

Mineral trioxide aggregate: A comprehensive literature review—Part II: Leakage and biocompatibility investigations. Torabinejad M, Parirokh M. J Endod 2010;36:190–202. PMID: 20113774

Physical and chemical properties of a new root-end filling material. Torabinejad M, Hong CU, McDonald F, Pitt Ford TR. J Endod 1995; 21: 349–53. PMID: 7499973

Cementoblasts maintain expression of osteocalcin in the presence of mineral trioxide aggregate. Thomson TS, Berry JE, Somerman MJ, Kirkwood KL. J Endod 2003; 29: 407–12. PMID: 12814226

Physicochemical basis of the biologic properties of mineral trioxide aggregate. Sarkar NK, Caicedo R, Ritwik P, Moiseyeva R, Kawashima I. J Endod 2005;31: 97–100. PMID: 15671817

Storage Medium Affects the Surface Porosity of Dental Cements. Saghiri MA, Shabani A, Asatourian A, Sheibani N. Journal of clinical and diagnostic research: JCDR. 2017; 11(8), ZC116. PMID: 28969288

Biocompatibility of two novel root repair materials. Ma J, Shen Y, Stojicic S, Haapasalo M. Journal of Endodontics. 2011; 37(6), 793-798. PMID: 21787491

Influence of Different Thickness of Mineral Trioxide Aggregate, Resin Modified Glass Ionomer Cement and Intermediate Restorative Material on Sealing Ability of Root End Fillings: An in vitro Study. Vajja S, Naik BD, Vummidisetti SV, Yarlagadda V. Journal of Clinical & Diagnostic Research. 2018; 12(1):ZC10-13. PMID: 29899639

Apatite‐forming ability (bioactivity) of ProRoot MTA. Gandolfi MG, Taddei P, Tinti A, Prati C. International Endodontic Journal. 2010; 43(10), 917-929. PMID: 20646080

The properties of a new endodontic material. Asgary S, Shahabi S, Jafarzadeh T, Amini S, Kheirieh S. Journal of endodontics. 2008; 34(8), 990-993. PMID: 18634932

##submission.downloads##

出版済

2019-07-25

巻号

巻 7 号 1 (2019)

セクション

Infancy & Adolescence

##submission.license##

Authors who publish with this journal agree to the following terms:

  1. The Author retains copyright in the Work, where the term “Work” shall include all digital objects that may result in subsequent electronic publication or distribution.
  2. Upon acceptance of the Work, the author shall grant to the Publisher the right of first publication of the Work.
  3. The Author shall grant to the Publisher and its agents the nonexclusive perpetual right and license to publish, archive, and make accessible the Work in whole or in part in all forms of media now or hereafter known under a Creative Commons Attribution 4.0 International License or its equivalent, which, for the avoidance of doubt, allows others to copy, distribute, and transmit the Work under the following conditions:
    1. Attribution—other users must attribute the Work in the manner specified by the author as indicated on the journal Web site;
    with the understanding that the above condition can be waived with permission from the Author and that where the Work or any of its elements is in the public domain under applicable law, that status is in no way affected by the license.
  4. The Author is able to enter into separate, additional contractual arrangements for the nonexclusive distribution of the journal's published version of the Work (e.g., post it to an institutional repository or publish it in a book), as long as there is provided in the document an acknowledgement of its initial publication in this journal.
  5. Authors are permitted and encouraged to post online a prepublication manuscript (but not the Publisher’s final formatted PDF version of the Work) in institutional repositories or on their Websites prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work. Any such posting made before acceptance and publication of the Work shall be updated upon publication to include a reference to the Publisher-assigned DOI (Digital Object Identifier) and a link to the online abstract for the final published Work in the Journal.
  6. Upon Publisher’s request, the Author agrees to furnish promptly to Publisher, at the Author’s own expense, written evidence of the permissions, licenses, and consents for use of third-party material included within the Work, except as determined by Publisher to be covered by the principles of Fair Use.
  7. The Author represents and warrants that:
    1. the Work is the Author’s original work;
    2. the Author has not transferred, and will not transfer, exclusive rights in the Work to any third party;
    3. the Work is not pending review or under consideration by another publisher;
    4. the Work has not previously been published;
    5. the Work contains no misrepresentation or infringement of the Work or property of other authors or third parties; and
    6. the Work contains no libel, invasion of privacy, or other unlawful matter.
  8. The Author agrees to indemnify and hold Publisher harmless from Author’s breach of the representations and warranties contained in Paragraph 6 above, as well as any claim or proceeding relating to Publisher’s use and publication of any content contained in the Work, including third-party content.

Revised 7/16/2018. Revision Description: Removed outdated link.