In-Vitro study to Assess Effect of a Glide Path on Canal Transportation and Centering Ratio in Double Curved canals.

Autori

DOI:

https://doi.org/10.5195/d3000.2021.131

Parole chiave:

endodontic treatment, canal centric, R-Pilot system, deviation amount.

Abstract

Objective: In endodontic treatment, creating a glide path became one of the recommended essential principles to obtain a safe preparation as possible; so the aim of the research is to evaluate the efficiency of the R-Pilot system in glide path preparation within the double curved canals.

Study design: A laboratory study to assess the efficiency R-Pilot mechanical patency system on the shape marinating of the canal. Those criteria were used to evaluate the change in the original shape of the canal, Canal Transportation and Centering Ratio. The data were analyzed using SPSS V.13 program and the correlation between the variables were defined using descriptive statistics and inductive statistical tests (chi-square, T Student for independent samples, ANOVA).

Results: no significant difference between the two glide path creation systems was found in terms of the deviation amount from the canal centric. whereas, between the R-Pilot system and the manual preparation, significant difference was found in the preserving rate of the canal centric at both the coronal area and the entire canal.

Conclusion: glide path creation in the previously mentioned methods with confirmation on the importance of the mechanical patency in terms of speed, Reducing the effort and burden imposed on the practitioner compared to the use of manual files. XP Endo shaper had lower deviation values and more ability to save the shape and centric of the canal.

Biografie autore

Raghad Alhalabi, Department of Operative Dentistry, Faculty of Dentistry, Damascus University, Damascus, Syria.

Department of Operative Dentistry

Mohammad Salem Rekab, Department of Operative Dentistry, Faculty of Dentistry, Damascus University, Damascus, Syria.

Department of Operative Dentistry

Khaldaon hossein Alhroob, Department of Periodontology, Faculty of Dentistry, Damascus University, Damascus, Syria.

Department of Periodontology

Maher Al-assaf, Department of Oral Histology and Pathology, Faculty of Dentistry, Damascus University, Damascus, Syria.

Department of Oral Histology and Pathology

Riferimenti bibliografici

Comparative Evaluation of Root Canal Transportation by Three NiTi Single-File Systems in Curved Canals: A Cone Beam Computed Tomography Study. Saberi E, Farhad-Mollashahi N, Bijari S, Daryaeian M. Int J Dent. 2018 May;14:4151692. doi: 10.1155/2018/4151692. PMID: 29861728.

Shaping ability of ProTaper Universal, WaveOne and ProTaper Next in simulated L-shaped and S-shaped root canals. Wu H, Peng C, Bai Y, Hu X, Wang L, Li C. BMC Oral Health. 2015 Mar;15(1):27. doi: 10.1186/s12903-015-0012-z. PMID: 25886847.

Analysis of Ni-Ti versus stainless steel instrumentation in resin simulated canals. Coleman CL, Svec TA. J Endod. 1997 Apr;23(4):232-235. doi: 10.1016/S0099-2399(97)80053-2. PMID: 9594772.

Bending resistance and cyclic fatigue life of Reciproc Blue, WaveOne Gold, and Genius files in a double (S-shaped) curved canal. Özyürek T, Gündoğar M, Yılmaz K, Uslu G. J Dent Res Dent Clin Dent Prospects. 2017 Fall;11(4):241-246. doi: 10.15171/joddd.2017.042. PMID: 29354251.

Safe root canal preparation using reciprocating nickel-titanium instruments. Ha JH. Restor Dent Endod. 2015 Aug;40(3):253-254. doi: 10.5395/rde.2015.40.3.253. PMID: 26295031.

The effect of preparation procedures on original canal shape and on apical foramen shape. Weine FS, Kelly RF, Lio PJ. J Endod. 1975 Aug;1(8):255-262. doi: 10.1016/S0099-2399(75)80037-9. PMID: 10697472.

The shaping effects of three nickel-titanium rotary instruments in simulated S-shaped canals. Yoshimine Y, Ono M, Akamine A. J Endod. 2005 May;31(5):373-275. doi: 10.1097/01.don.0000140568.40462.43. PMID: 15851932.

Shaping ability of ProTaper NEXT, ProTaper Universal and iRace files in simulated S-shaped canals. Hiran-us S, Pimkhaokham S, Sawasdichai J, Ebihara A, Suda H. Aust Endod J. 2016 Apr;42(1):32-36. doi: 10.1111/aej.12117. PMID: 26420685.

Apical root canal transportation and remaining dentin thickness associated with ProTaper Universal with and without PathFile. Zanette F, Grazziotin-Soares R, Flores ME, Camargo Fontanella VR, Gavini G, Barletta FB. J Endod. 2014 May;40(5):688-693. doi: 10.1016/j.joen.2013.09.001. PMID: 24767565.

Comparison of glide paths created with K-files, PathFiles, and the ProGlider file, and their effects on subsequent WaveOne preparation in curved canals. Zheng L, Ji X, Li C, Zuo L, Wei X. BMC Oral Health. 2018 Aug 29;18(1):152. doi: 10.1186/s12903-018-0614-3. PMID: 30157822.

Comparison among manual instruments and PathFile and Mtwo rotary instruments to create a glide path in the root canal preparation of curved canals. Alves Vde O, Bueno CE, Cunha RS, Pinheiro SL, Fontana CE, de Martin AS. J Endod. 2012 Jan;38(1):117-120. doi: 10.1016/j.joen.2011.10.001. PMID: 22152634.

Endodontic update 2006. West J. J Esthet Restor Dent. 2006;18(5):280-300. doi: 10.1111/j.1708-8240.2006.00039.x. PMID: 16987326.

A dozen ways to prevent nickel-titanium rotary instrument fracture. Di Fiore PM. J Am Dent Assoc. 2007 Feb;138(2):196-201; quiz 249. doi: 10.14219/jada.archive.2007.0136. PMID: 17272374.

Peters O A, Koka R S (2009) Preparation of coronal and radicular spaces.

Comparison of Shaping Ability of Different Single-File Systems Using Microcomputed Tomography. Elashiry MM, Saber SE, Elashry SH. Eur J Dent. 2020 Feb;14(1):70-76. doi: 10.1055/s-0040-1701393. PMID: 32005040.

Shaping Ability of XP Endo Shaper File in Curved Root Canal Models. Alfadley A, Alrajhi A, Alissa H, Alzeghaibi F, Hamadah L, Alfouzan K, Jamleh A. Int J Dent. 2020 Feb 17;2020:4687045. doi: 10.1155/2020/4687045. PMID: 32148503.

Canal transportation and centering ratio after preparation in severely curved canals: analysis by micro-computed tomography and double-digital radiography. Poly A, AlMalki F, Marques F, Karabucak B. Clin Oral Investig. 2019 Dec;23(12):4255-4262. doi: 10.1007/s00784-019-02870-8. PMID: 30834991.

Higher Speed and No Glide Path: A New Protocol to Increase the Efficiency of XP Shaper in Curved Canals-An In Vitro Study. Webber M, Piasecki L, Jussiani EI, Andrello AC, Dos Reis PJ, Azim KA, Azim AA. J Endod. 2020 Jan;46(1):103-109. doi: 10.1016/j.joen.2019.10.014. PMID: 31761330.

hanges in root canal geometry after preparation assessed by high-resolution computed tomography. Peters OA, Laib A, Göhring TN, Barbakow F. C. J Endod. 2001 Jan;27(1):1-6. doi: 10.1097/00004770-200101000-00001. PMID: 11487156.

A microcomputed tomography evaluation of the shaping ability of three thermally-treated nickel-titanium rotary file systems in curved canals. Huang Z, Quan J, Liu J, Zhang W, Zhang X, Hu X. J Int Med Res. 2019 Jan;47(1):325-334. doi: 10.1177/0300060518801451. PMID: 30282507.

Transportation assessment in artificial curved canals after instrumentation with Reciproc, Reciproc Blue, and XP-endo Shaper Systems. Pacheco-Yanes J, Gazzaneo I, Pérez AR, Armada L, Neves MAS. J Investig Clin Dent. 2019 Aug;10(3):e12417. doi: 10.1111/jicd.12417. PMID: 30955238.

Comparative analysis of canal transportation and centring ability of three Ni-Ti rotary endodontic systems: Protaper®, MTwo® and Revo-S™, assessed by micro-computed tomography. Vallaeys K, Chevalier V, Arbab-Chirani R. Odontology. 2016 Jan;104(1):83-88. doi: 10.1007/s10266-014-0176-z. PMID: 25248755.

Shaping ability of 4 different single-file systems in simulated S-shaped canals. Saleh AM, Vakili Gilani P, Tavanafar S, Schäfer E. J Endod. 2015 Apr;41(4):548-552. doi: 10.1016/j.joen.2014.11.019. PMID: 25576206.

A comparison of the shaping ability of three nickel-titanium rotary instruments: a micro-computed tomography study via a contrast radiopaque technique in vitro. Wei Z, Cui Z, Yan P, Jiang H. BMC Oral Health. 2017 Jan 9;17(1):39. doi: 10.1186/s12903-016-0326-5. PMID: 28068971.

Microcomputed Assessment of Transportation, Centering Ratio, Canal Area, and Volume Increase after Single-file Rotary and Reciprocating Glide Path Instrumentation in Curved Root Canals: A Laboratory Study. Aydın ZU, Keskin NB, Özyürek T, Geneci F, Ocak M, Çelik HH. J Endod. 2019 Jun;45(6):791-796. doi: 10.1016/j.joen.2019.02.012. PMID: 30935620.

Shaping ability of different nickel-titanium systems in simulated S-shaped canals with and without glide path. Bürklein S, Poschmann T, Schäfer E. J Endod. 2014 Aug;40(8):1231-1234. doi: 10.1016/j.joen.2014.01.043. PMID: 25069939.

Cleaning and shaping the root canal. Schilder H. Dent Clin North Am. 1974 Apr;18(2):269-296. PMID: 4522570.

A Micro-computed Tomography Evaluation of the Shaping Ability of Two Nickel-titanium Instruments, HyFlex EDM and ProTaper Next. Venino PM, Citterio CL, Pellegatta A, Ciccarelli M, Maddalone M. J Endod. 2017 Apr;43(4):628-632. doi: 10.1016/j.joen.2016.11.022. PMID: 28215346.

Micro-Computed Tomographic Evaluation of Canal Transportation and Centering Ability of 4 Heat-Treated Nickel-Titanium Systems. Razcha C, Zacharopoulos A, Anestis D, Mikrogeorgis G, Zacharakis G, Lyroudia K. J Endod. 2020 May;46(5):675-681. doi: 10.1016/j.joen.2020.01.020. PMID: 32171564.

##submission.downloads##

Pubblicato

2021-07-19

Fascicolo

V. 9 N. 1 (2021)

Sezione

Adults & the Elderly

Licenza

Authors who publish with this journal agree to the following terms:

  1. The Author retains copyright in the Work, where the term “Work” shall include all digital objects that may result in subsequent electronic publication or distribution.
  2. Upon acceptance of the Work, the author shall grant to the Publisher the right of first publication of the Work.
  3. The Author shall grant to the Publisher and its agents the nonexclusive perpetual right and license to publish, archive, and make accessible the Work in whole or in part in all forms of media now or hereafter known under a Creative Commons Attribution 4.0 International License or its equivalent, which, for the avoidance of doubt, allows others to copy, distribute, and transmit the Work under the following conditions:
    1. Attribution—other users must attribute the Work in the manner specified by the author as indicated on the journal Web site;
    with the understanding that the above condition can be waived with permission from the Author and that where the Work or any of its elements is in the public domain under applicable law, that status is in no way affected by the license.
  4. The Author is able to enter into separate, additional contractual arrangements for the nonexclusive distribution of the journal's published version of the Work (e.g., post it to an institutional repository or publish it in a book), as long as there is provided in the document an acknowledgement of its initial publication in this journal.
  5. Authors are permitted and encouraged to post online a prepublication manuscript (but not the Publisher’s final formatted PDF version of the Work) in institutional repositories or on their Websites prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work. Any such posting made before acceptance and publication of the Work shall be updated upon publication to include a reference to the Publisher-assigned DOI (Digital Object Identifier) and a link to the online abstract for the final published Work in the Journal.
  6. Upon Publisher’s request, the Author agrees to furnish promptly to Publisher, at the Author’s own expense, written evidence of the permissions, licenses, and consents for use of third-party material included within the Work, except as determined by Publisher to be covered by the principles of Fair Use.
  7. The Author represents and warrants that:
    1. the Work is the Author’s original work;
    2. the Author has not transferred, and will not transfer, exclusive rights in the Work to any third party;
    3. the Work is not pending review or under consideration by another publisher;
    4. the Work has not previously been published;
    5. the Work contains no misrepresentation or infringement of the Work or property of other authors or third parties; and
    6. the Work contains no libel, invasion of privacy, or other unlawful matter.
  8. The Author agrees to indemnify and hold Publisher harmless from Author’s breach of the representations and warranties contained in Paragraph 6 above, as well as any claim or proceeding relating to Publisher’s use and publication of any content contained in the Work, including third-party content.

Revised 7/16/2018. Revision Description: Removed outdated link.