Shear Bond Strength Comparison Between Heat Cure Acrylic Resin and Other Types of Acrylic Denture Bases

Autori

  • Souad Hassan Ali Middle Technical University, Medical Technical Institute, Prosthodontic department, Baghdad, Iraq
  • Noor Adnan Abdul-Kareem

DOI:

https://doi.org/10.5195/d3000.2024.756

Parole chiave:

Dentistry, Denture base materials, Prosthodontics, Repair of acrylic denture base, Shear bond strength, 3D printed acrylic

Abstract

Objective: The study purpose was to examine the shear bonding strength of heat cure acrylic resin to thermoplastic resin and three-dimensional printed resin materials.

Methods: A total of 30 acrylic specimens were fabricated in this study. Each specimen had a basal and top parts. The basal part was rectangular in shape. We had three different groups: 10 specimens of a basal part made of heat cured polymethylmethacrylate, 10 specimens of a basal part made of thermoplastic, and 10 specimens of three dimensionally printed resin. The top part of which is attached to the basal one was formed into a cylindrical shape made of heat cure poly methyl methacrylate in all three groups.

Results: Significant differences were found between the heat cured polymethylmethacrylate and the other two groups (P<.001). Heat cured polymethylmethacrylate showed the highest bond strength (75 MPa), and thermoplastic resins showed the lowest (37 MPa). No significant difference in the shear bond strength was noticed between three dimensionally printed and thermoplastic acrylic.

Conclusion: This study revealed that the shear bond strength of heat cured acrylic denture base to the relining/repairing from the same material was significantly higher than three dimensionally printed and thermoplastic resins with HC relining/repairing material.

##submission.downloads##

Pubblicato

2024-11-27

Fascicolo

V. 12 N. 2 (2024)

Sezione

Adults & the Elderly

Licenza

Copyright (c) 2024 Souad Hassan Ali, Noor Adnan Abdul-Kareem

Creative Commons License

TQuesto lavoro è fornito con la licenza Creative Commons Attribuzione 4.0 Internazionale.

Authors who publish with this journal agree to the following terms:

  1. The Author retains copyright in the Work, where the term “Work” shall include all digital objects that may result in subsequent electronic publication or distribution.
  2. Upon acceptance of the Work, the author shall grant to the Publisher the right of first publication of the Work.
  3. The Author shall grant to the Publisher and its agents the nonexclusive perpetual right and license to publish, archive, and make accessible the Work in whole or in part in all forms of media now or hereafter known under a Creative Commons Attribution 4.0 International License or its equivalent, which, for the avoidance of doubt, allows others to copy, distribute, and transmit the Work under the following conditions:
    1. Attribution—other users must attribute the Work in the manner specified by the author as indicated on the journal Web site;
    with the understanding that the above condition can be waived with permission from the Author and that where the Work or any of its elements is in the public domain under applicable law, that status is in no way affected by the license.
  4. The Author is able to enter into separate, additional contractual arrangements for the nonexclusive distribution of the journal's published version of the Work (e.g., post it to an institutional repository or publish it in a book), as long as there is provided in the document an acknowledgement of its initial publication in this journal.
  5. Authors are permitted and encouraged to post online a prepublication manuscript (but not the Publisher’s final formatted PDF version of the Work) in institutional repositories or on their Websites prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work. Any such posting made before acceptance and publication of the Work shall be updated upon publication to include a reference to the Publisher-assigned DOI (Digital Object Identifier) and a link to the online abstract for the final published Work in the Journal.
  6. Upon Publisher’s request, the Author agrees to furnish promptly to Publisher, at the Author’s own expense, written evidence of the permissions, licenses, and consents for use of third-party material included within the Work, except as determined by Publisher to be covered by the principles of Fair Use.
  7. The Author represents and warrants that:
    1. the Work is the Author’s original work;
    2. the Author has not transferred, and will not transfer, exclusive rights in the Work to any third party;
    3. the Work is not pending review or under consideration by another publisher;
    4. the Work has not previously been published;
    5. the Work contains no misrepresentation or infringement of the Work or property of other authors or third parties; and
    6. the Work contains no libel, invasion of privacy, or other unlawful matter.
  8. The Author agrees to indemnify and hold Publisher harmless from Author’s breach of the representations and warranties contained in Paragraph 6 above, as well as any claim or proceeding relating to Publisher’s use and publication of any content contained in the Work, including third-party content.

Revised 7/16/2018. Revision Description: Removed outdated link.