Profile of Fluoride Release from a Nanohybrid Composite Resin

نویسندگان

  • Raquel Assed Bezerra Silva Department of Pediatric Clinics, Preventive and Community Dentistry, School of Dentistry of Ribeirão Preto, University of São Paulo, Ribeirão Preto, SP, Brazil
  • Fernanda Regina Ribeiro Santos Department of Pediatric Clinics, Preventive and Community Dentistry, School of Dentistry of Ribeirão Preto, University of São Paulo, Ribeirão Preto, SP, Brazil
  • Augusto Cesar Cropanese Spadaro Department of Physics and Chemistry, School of Pharmaceutical Sciences of Ribeirão Preto, University of São Paulo, Ribeirão Preto, SP, Brazil
  • Ana Cristina Morseli Polizello Department of Physics and Chemistry, School of Pharmaceutical Sciences of Ribeirão Preto, University of São Paulo, Ribeirão Preto, SP, Brazil
  • Andiara De Rossi Department of Pediatric Clinics, Preventive and Community Dentistry, School of Dentistry of Ribeirão Preto, University of São Paulo, Ribeirão Preto, SP, Brazil
  • Marilia Rodrigues Moreira Department of Pediatric Clinics, Preventive and Community Dentistry, School of Dentistry of Ribeirão Preto, University of São Paulo, Ribeirão Preto, SP, Brazil
  • Paulo Nelson-Filho Department of Pediatric Clinics, Preventive and Community Dentistry, School of Dentistry of Ribeirão Preto, University of São Paulo, Ribeirão Preto, SP, Brazil

DOI::

https://doi.org/10.5195/d3000.2015.29

کلمات کلیدی:

composite resin, sodium fluoride, glass ionomer cement

چکیده

The aim of this study was to evaluate in vitro the amount and profile of fluoride release from a fluoride-containing nanohybrid composite resin (Tetric® N-Ceram) by direct potentiometry. Thirty specimens (5 mm diameter x 3 mm high; n=10/material) were made of Tetric® N-Ceram, Vitremer® resin-modified glass ionomer cement (RMGIC) (positive control) or Filtek® Z350 nanofill composite resin (negative control). The specimens were stored individually in plastic tubes containing 1 mL of artificial saliva at 37°C, which was daily renewed during 15 days. At each renewal of saliva, the amount of fluoride ions released in the solution was measured using a fluoride ion-selective electrode with ion analyzer, and the values obtained in mV were converted to ppm (µg/mL). Data were analyzed statistically by ANOVA and Tukey’s post-hoc test at a significance level of 5%. The results showed that the resins Tetric® N-Ceram and Filtek® Z350 did not release significant amounts of fluoride during the whole period of evaluation (p>0.05). Only Vitremer® released significant amounts of fluoride ions during the 15 days of the experiment, with greater release in first 2 days (p<0.05) and stabilization in the subsequent days (p>0.05). In conclusion, the nanohybrid composite resin Tetric® N-Ceram did not present in vitro fluoride-releasing capacity throughout the 15 days of study.

مراجع

Effects of Aged Fluoride-containing Restorative Materials on Recurrent Root Caries. Hsu YS, Donly KJ, Drake DR & Wefel JS. Journal of Dental Research. 1998; 77(2) 418-425. PMID: 9465175

Fluoride-containing restorative materials. Burke FM, Ray NJ & McConnell RJ. International Dental Journal. 2006; 56(1) 33-43. PMID: 16515011

Oral fluoride reservoirs and the prevention of dental caries. Vogel GL. Monographs in Oral Science. 2011; 22 146-157. PMID: 21701197

Reasons for replacement of restorations in permanent teeth in general dental practice. Mjor IA, Moorhead JE & Dahl JE. International Dental Journal. 2000; 50(6) 361–366. PMID: 11197194

An overview of reasons for the placement and replacement of restorations. Deligeorgi V, Mjor IA & Wilson NH. Primary Dental Care. 2001; 8(1) 5-11. PMID: 11405031

Prevention of in vitro secondary caries with an experimental fluoride-exchanging resin. Zimmerman BF, Rawls HR & Querens AE. Journal of Dental Research. 1984; 63(5) 689–692. PMID: 6584474

Review on fluoride-releasing restorative materials - Fluoride release and uptake characteristics, antibacterial activity and influence on caries formation. Wiegand A, Buchalla W & Attin T. Dental Materials. 2007; 23(3) 343–362. PMID: 16616773

Dependence of in vitro demineralization of apatite and remineralization of dental enamel on fluoride concentration. Featherstone JD, Glena R, Shariati M & Shields CP. Journal of Dental Research. 1990; 69 620-625. PMID: 2312892

Fluoride release from restorative materials and its effects on dentin demineralization. . Francci C, Deaton TG, Arnold RR, Swift EJ Jr, Perdigão J, Bawden JW. Journal of Dental Research. 1999; 78(10) 1647-54. PMID: 10520970

Effect of fluorides from various restorative materials on remineralization of adjacent tooth: An in vitro study. Baliga MS & Bhat SS. Journal of Indian Society of Pedodontics and Preventive Dentistry. 2010; 28 84-90. PMID: 20660973

Fluoride release from glass–ionomer cements, compomers and resin composites. Vermeersch G, Leloup G & Vreven J. Journal of Oral Rehabilitation. 2001; 28 26-32. PMID: 11298906

Fluoride release from a new glass-ionomer cement. Neelakantan P, John S, Anand S, Sureshbabu N & Subbarao C. Operative Dentistry. 2011; 36(1) 80-85. PMID: 21488733

Novel F-releasing composite with improved mechanical properties. Ling L, X X, Choi GY, Billodeaux D, Guo G & Diwan RM. Journal of Dental Research. 2009; 88(1) 83-88. PMID: 19131323

Enamel fluoride concentrations in unerupted third molars and the influence of fluoridated water on caries scores. Mestriner W Jr, Polizello AC & Spadaro AC. Caries Research. 1996; 30(1) 83-7. PMID: 8850588

-Rechargeability of fluoride releasing pit and fissure sealants and restorative resin composites. . Steinmetz MJ, Pruhs RJ, Brooks JC, Dhuru VB & Post AC. American Journal of Dentistry. 1997; 10(1) 36-40. PMID: 9545919

Do low-shrink composites reduce polymerization shrinkage effects? Tantbirojn D, Pfeifer CS, Braga RR & Versluis A. Journal of Dental Research. 2011; 90(5) 596-601. PMID: 21282725

Strength and fluoride release characteristics of a calcium fluoride based dental nanocomposite. Xu HHK, Moreau JL, Sun L & Chow LC. Journal of Biomaterials. 2008; 29(32) 4261-4267. PMID: 18708252

Fluoride release of six restorative materials in water and pH-cycling solution. Garcez RM, Buzalaf RM, Buzalaf MA & Araújo PA. Journal of Applied of Oral Science. 2007; 15(5) 406-411. PMID: 19089169

Novel CaF2 Nanocomposite with High Strength and Fluoride Ion Release. Xu HHK, Moreau JL, Sun L & Chow LC. Journal of Dental Research. 2010; 89(7) 739-745. PMID:

Elevated Fluoride Products Enhance Remineralization of Advanced Enamel Lesions. Cate JM, Buijs MJ, Chaussain Miller C & Exterkate RAM. Dental Research. 2008; 87(10) 943-947. PMID: 20439933

Compressive strength, fluoride release and recharge of fluoride-releasing materials. Xu X & Burgess JO. Biomaterials. 2003; 24(14) 2451-2461. PMID: 12695072

Fluoride Release and Recharge from Different Materials Used as Fissure Sealants. Bayrak S, Tunc ES, Aksoy A, Ertas E, Guvenc D & Ozer S. European Journal of Dentistry. 2010; 4(3) 245-250. PMID: 20613911

Fluoride release and uptake capacities of fluoride-releasing restorative materials. Attar N & Turgut MD. Operative Dentistry. 2003; 28(4) 395-402. PMID: 12877425

Fluoride release and antibacterial activity of selected dental materials. Marczuk-Kolada G, Jakoniuk P, Mystkowska J, Lukzaj-Cepowicz E, Waszkiel D, Dabrowski JR & Leszczynska K. Postȩpy Higieny i Medycyny Doświadczalnej. 2006; 60 416-420. PMID: 18493226

Fluoride content and recharge ability of five glassionomer dental materials. Markovic DL, Petrovic BB & Peric TO. BioMed Central Oral Health. . 2008; 28(8) 21. PMID: 18655734

Comparative evaluation of fluoride release from PRG – composites and compomer on application of topical fluoride: An in-vitro study. Dhull KS & Nandlal B. Journal of Indian Society of Pedodontics and Preventive Dentistry. 2009; 27(1) 27-32. PMID: 19414971

##submission.downloads##

چاپ شده

2015-02-24

شماره

دوره 3 شماره 1 (2015)

نوع مقاله

Infancy & Adolescence

مجوز

Authors who publish with this journal agree to the following terms:

  1. The Author retains copyright in the Work, where the term “Work” shall include all digital objects that may result in subsequent electronic publication or distribution.
  2. Upon acceptance of the Work, the author shall grant to the Publisher the right of first publication of the Work.
  3. The Author shall grant to the Publisher and its agents the nonexclusive perpetual right and license to publish, archive, and make accessible the Work in whole or in part in all forms of media now or hereafter known under a Creative Commons Attribution 4.0 International License or its equivalent, which, for the avoidance of doubt, allows others to copy, distribute, and transmit the Work under the following conditions:
    1. Attribution—other users must attribute the Work in the manner specified by the author as indicated on the journal Web site;
    with the understanding that the above condition can be waived with permission from the Author and that where the Work or any of its elements is in the public domain under applicable law, that status is in no way affected by the license.
  4. The Author is able to enter into separate, additional contractual arrangements for the nonexclusive distribution of the journal's published version of the Work (e.g., post it to an institutional repository or publish it in a book), as long as there is provided in the document an acknowledgement of its initial publication in this journal.
  5. Authors are permitted and encouraged to post online a prepublication manuscript (but not the Publisher’s final formatted PDF version of the Work) in institutional repositories or on their Websites prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work. Any such posting made before acceptance and publication of the Work shall be updated upon publication to include a reference to the Publisher-assigned DOI (Digital Object Identifier) and a link to the online abstract for the final published Work in the Journal.
  6. Upon Publisher’s request, the Author agrees to furnish promptly to Publisher, at the Author’s own expense, written evidence of the permissions, licenses, and consents for use of third-party material included within the Work, except as determined by Publisher to be covered by the principles of Fair Use.
  7. The Author represents and warrants that:
    1. the Work is the Author’s original work;
    2. the Author has not transferred, and will not transfer, exclusive rights in the Work to any third party;
    3. the Work is not pending review or under consideration by another publisher;
    4. the Work has not previously been published;
    5. the Work contains no misrepresentation or infringement of the Work or property of other authors or third parties; and
    6. the Work contains no libel, invasion of privacy, or other unlawful matter.
  8. The Author agrees to indemnify and hold Publisher harmless from Author’s breach of the representations and warranties contained in Paragraph 6 above, as well as any claim or proceeding relating to Publisher’s use and publication of any content contained in the Work, including third-party content.

Revised 7/16/2018. Revision Description: Removed outdated link.