Comparison between Marginal Gap of Stone and Metal Dies in a CAD/CAM System
DOI::
https://doi.org/10.5195/d3000.2026.1295کلمات کلیدی:
Zirconia, CAD/CAM, Prosthodonticsچکیده
Objective: The purpose of this study was to evaluate and contrast the zirconia crown's marginal gap on stone and metal dies in a CAD/CAM system. Materials and Methods: After preparing a melamine tooth (lower six molar) with 1.5mm occlusal reduction, 1 mm axial reduction and deep shoulder finishing line to construct metal and stone die .It was scanned with a 3D laser scanner by CAD/CAM system. Melamine tooth was milled and replicated into chrome –cobalt die and stone die. Twenty samples as a total, 10 for metal die and 10 for stone die were prepared. On the master die, marginal gaps were measured at four specific locations on each surface (mesial, buccal, distal, and lingual). Using a microscope digital camera (Dino Lite) at a magnification of 110X, the direct view technique was employed, and the measurements of the marginal gap were recorded using the image J software. Results: In the metal group the highest marginal gap was recorded while the lowest marginal gap was recorded with the stone group. Conclusion: The metal group recorded a statistically significant higher marginal gap than the marginal gap that was recorded in the stone group. Stone die was more accurate when 3D scanner is used.
##submission.downloads##
چاپ شده
شماره
نوع مقاله
مجوز
حق نشر 2026 Quasy Abdulateef Hasan, Shahrazad Fouad Karkosh, Raya Hatim Salal, Sandus I. ibrahim, Zainab Talib Kareem
این پروژه تحت مجوز بین المللی Creative Commons Attribution 4.0 می باشد.
Authors who publish with this journal agree to the following terms:
- The Author retains copyright in the Work, where the term “Work” shall include all digital objects that may result in subsequent electronic publication or distribution.
- Upon acceptance of the Work, the author shall grant to the Publisher the right of first publication of the Work.
- The Author shall grant to the Publisher and its agents the nonexclusive perpetual right and license to publish, archive, and make accessible the Work in whole or in part in all forms of media now or hereafter known under a Creative Commons Attribution 4.0 International License or its equivalent, which, for the avoidance of doubt, allows others to copy, distribute, and transmit the Work under the following conditions:
- Attribution—other users must attribute the Work in the manner specified by the author as indicated on the journal Web site;
- The Author is able to enter into separate, additional contractual arrangements for the nonexclusive distribution of the journal's published version of the Work (e.g., post it to an institutional repository or publish it in a book), as long as there is provided in the document an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post online a prepublication manuscript (but not the Publisher’s final formatted PDF version of the Work) in institutional repositories or on their Websites prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work. Any such posting made before acceptance and publication of the Work shall be updated upon publication to include a reference to the Publisher-assigned DOI (Digital Object Identifier) and a link to the online abstract for the final published Work in the Journal.
- Upon Publisher’s request, the Author agrees to furnish promptly to Publisher, at the Author’s own expense, written evidence of the permissions, licenses, and consents for use of third-party material included within the Work, except as determined by Publisher to be covered by the principles of Fair Use.
- The Author represents and warrants that:
- the Work is the Author’s original work;
- the Author has not transferred, and will not transfer, exclusive rights in the Work to any third party;
- the Work is not pending review or under consideration by another publisher;
- the Work has not previously been published;
- the Work contains no misrepresentation or infringement of the Work or property of other authors or third parties; and
- the Work contains no libel, invasion of privacy, or other unlawful matter.
- The Author agrees to indemnify and hold Publisher harmless from Author’s breach of the representations and warranties contained in Paragraph 6 above, as well as any claim or proceeding relating to Publisher’s use and publication of any content contained in the Work, including third-party content.
Revised 7/16/2018. Revision Description: Removed outdated link.
