Comparative evaluation of retentive strength of polyvinyl siloxane impression materials to custom tray using different tray adhesives: An In Vitro study
DOI:
https://doi.org/10.5195/d3000.2020.94Palabras clave:
Tray adhesive, Polyvinyl siloxane impression material, Retentive strengthResumen
The retentive strength of the impression material to the impression tray is an important factor that can affect the quality of the final impression. Separation of the impression from the tray or tearing of the impression while removing from the mouth could be one of the reasons for distortion. It is imperative to know the most effective tray adhesive which can be used with different brands of rubber-based impression material. So, this study was directed to compare the different tray adhesives that can be effectively used in our day-to-day clinical practice.
Citas
Michael N. Mandikos. Polyvinyl siloxane impression materials: An update on clinical use. Aust Dent J 1998 Feb;43(6):428–34.
Mohd. Zainal Abidin Mohd Sulong and Derrick J. Setchell, University of Malaya, Faculty of Dentistry, Kuala Lumpur, Malaysia, and Institute of Dental, Surgery, London, England. Properties of the tray adhesive of an addition polymerizing silicone to impression tray materials. J Prosthet Dent 1991 66:743–7.
Ashwini B.L, Manjunath S, Mathew K.X. The bond strength of different tray adhesives on vinyl polysiloxane to two tray materials: an in vitro study. J Indian Prosthodont Soc. 2014 Mar;14(1):29–37.
Bomberg T.J, Goldfogel M.H, Hoffman W, Bomberg S.E. Considerations for adhesion of impression materials to impression trays. J Prosthet Dent. 1988 Dec;60(6):681–4.
Samman J.M., Fletcher A. A study of impression tray adhesives. Quintessence Int Berl Ger 1985. 1985 Apr;16(4):305–9.
Tjan AH, Whang SB. Comparing effects of tray treatment on the accuracy of dies. J Prosthet Dent. 1987 Aug;58(2):175–8.
Peregrina A, Land M.F, Wandling C, Johnston W.M. The effect of different adhesives on vinyl polysiloxane bond strength to two tray materials. J Prosthet Dent. 2005 Sep;94(3):209–13.
Payne J.A, Pereira B.P. Bond strength of two nonaqueous elastomeric impression materials bonded to two thermoplastic resin tray materials. J Prosthet Dent. 1995 Dec;74(6):563–8.
Marafie Y, Looney S, Nelson S, Chan D, Browning W, Rueggeberg F. Retention strength of impression materials to a tray material using different adhesive methods: an in vitro study. J Prosthet Dent. 2008 Dec;100(6):432–40.
Descargas
Publicado
Número
Sección
Licencia
Authors who publish with this journal agree to the following terms:
- The Author retains copyright in the Work, where the term “Work” shall include all digital objects that may result in subsequent electronic publication or distribution.
- Upon acceptance of the Work, the author shall grant to the Publisher the right of first publication of the Work.
- The Author shall grant to the Publisher and its agents the nonexclusive perpetual right and license to publish, archive, and make accessible the Work in whole or in part in all forms of media now or hereafter known under a Creative Commons Attribution 4.0 International License or its equivalent, which, for the avoidance of doubt, allows others to copy, distribute, and transmit the Work under the following conditions:
- Attribution—other users must attribute the Work in the manner specified by the author as indicated on the journal Web site;
- The Author is able to enter into separate, additional contractual arrangements for the nonexclusive distribution of the journal's published version of the Work (e.g., post it to an institutional repository or publish it in a book), as long as there is provided in the document an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post online a prepublication manuscript (but not the Publisher’s final formatted PDF version of the Work) in institutional repositories or on their Websites prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work. Any such posting made before acceptance and publication of the Work shall be updated upon publication to include a reference to the Publisher-assigned DOI (Digital Object Identifier) and a link to the online abstract for the final published Work in the Journal.
- Upon Publisher’s request, the Author agrees to furnish promptly to Publisher, at the Author’s own expense, written evidence of the permissions, licenses, and consents for use of third-party material included within the Work, except as determined by Publisher to be covered by the principles of Fair Use.
- The Author represents and warrants that:
- the Work is the Author’s original work;
- the Author has not transferred, and will not transfer, exclusive rights in the Work to any third party;
- the Work is not pending review or under consideration by another publisher;
- the Work has not previously been published;
- the Work contains no misrepresentation or infringement of the Work or property of other authors or third parties; and
- the Work contains no libel, invasion of privacy, or other unlawful matter.
- The Author agrees to indemnify and hold Publisher harmless from Author’s breach of the representations and warranties contained in Paragraph 6 above, as well as any claim or proceeding relating to Publisher’s use and publication of any content contained in the Work, including third-party content.
Revised 7/16/2018. Revision Description: Removed outdated link.
