Applicability of Moyer’s prediction tables to estimate the mesio-distal diameter of canines and premolars

Autor/innen

  • Amanda de Sousa Galdino
  • Tânia Braga Ramos
  • Vitor Marques Filgueiras
  • Rosa Helena Wanderley Lacerda

DOI:

https://doi.org/10.5195/d3000.2019.86

Schlagworte:

mixed dentition, orthodontics, malocclusion

Abstract

Objective: The aim of this study was to verify the applicability of Moyer’s prediction tables to estimate the mesio-distal diameter of canines and pre-molars in a population of North-Eastern Brazil. Materials and Methods: A sample of 100 plaster moulds of 12-18-year-old patients was selected from the dental archives of the Brazilian Association of Orthodontists Dental School Clinic in the city of João Pessoa, State of Paraiba. Analyses were performed with R software (version 3.1.3). The upper and lower canines and premolars on both sides of the arch were measured. Data Analysis: Linear regression analysis was used to assess the closeness of the estimated values in each percentile of Moyer’s prediction table.  Analyses were performed at a significance level of 5%. Results: Gender dimorphism (P < 0.001) was found in both upper and lower arches. In the upper arch, the best regression models for data analysis of female, male and both were, respectively, p5 and p6”, p25 and p35, and p35 and 75, whereas in the lower arch were p15, p35 and p75, with “p75 being the best-fitted percentile following application of correction equations for both genders. Conclusions: The Moyer’s prediction table can be applied for estimating the mesio-distal diameters of canines and pre-molars, provided that a correction factor is used for the population under study.

Literaturhinweise

Patterns of dental crowding in the lower arch and contributing factors. A statistical study. Shi-genobu N, Hisano M, Shima S et al. Angle Orthod; 2007;15:303-310. https://doi.org/10.2319/0003-3219(2007)077[0303:PODCIT]2.0.CO;2

Classification of Malocclusion. Angle EH. Dent Cosmos; 1899; 41: 248-64.

Avaliação comparativa de três métodos para cálculo do espaço requerido na dentição mista . Oli-veira MVP, Ruellas MM, Oliveira AC. . Revista Odonto Ciência – Fac. Odonto/PUCRS; 2007:148-153. http://scholar.google.com.br/scholar_url?url=http%3A%2F%2Fwww.matheus-pithon.com.br%2Fv2%2Fwp-content%2Fuploads%2Fodonto-2007-226.pdf&hl

Análise da dentição mista: to-mografia versus predição e medi-da radiográfica. Felício LG, Ruellas ACO, Bolognese AM, Santana EF, Araújo MTZ. Dental Press J Or-thod; 2010; 15: 159-165.

New, fast, and accurate proce-dure to calibrate a 2-dimensional digital measurement method. Paredes V, Gandia JL, Cibrian R. Am J Orthod Dentofacial Orthop; 2005; 127: 518-519.

Handbook of Orthodontics for the Student and General Praction-er. Moyers RE.. 2ª ed. Chicago; Year Book Medical, 1963.

Orthodontic probability tables forblack patients of Africa descent: mixed dentition analysis. Schirmer UR, Wiltshire, WA. Am J Or-thodDentofacial Orthop.;1997; 112: 545-551.

Un modelo para evaluar la cali-dad de los tests utilizados en Es-paña. Prieto G; MUÑIZ, J.; Dis-ponível em: .

Prediction of the mesiodistal width of unerupted permanent canines and premolars: a statisti-cal approach. Boboc A, Dibbets J. Am J Orthod Dentofacial Orthop; 2010; 137: 503-507.

Comparação de diferentes in-cidências radiográficas para a pre-dição de tamanho dentário na dentição mista. Gonçalves TS, Me-nezes LM, Lima, EMS. Revista Or-todontia Gaúcha; 2011;15: 1-12.

Determinação do diâmetro mésio-distal de dentes caninos e pré-molares em indivíduos brasi-leiros da região de Araraquara. Paixão RF, Cordeiro, RCL, Gandini junior, L. R Dental Press Ortodon Ortop Facial; 2002; 7:45-43.

Applicability of moyers' proba-bility table in the population of the northeast of Brazil. Pithon MM , Lacerda-Santos R, Araujo JTS, Coqueiro RS. Biosci. J. 2015; 31: 311-318.

Mixed Dentition Space Analysis in Kodava Population: A Compari-son of Two Methods. Ramesh N, Reddy MS, Palukunnu B, Shetty B, Puthalat U. Journal of Clinical and Diagnostic Research; 2014; 8: 01-06.

Determinação das medidas dentárias mésio-distais em indiví-duos brasileiros leucodermas com oclusão normal. Yamaguto OT, Vasconcelos MHF. Dental Press Ortodon Ortop Facial; 2005; 10: 99-107.

Aplicabilidade da tabela de Moyers na predição do tamanho dos caninos e pré-molares em bra-sileiros leucodermas descendentes de europeus. Farret MMB, Jurach EM, Lopes LFD, Porto SS, Porto VS.Ortodontia; 2005; 38: 163-168.

Análise de dentição mista – Avaliação das tabelas de Moyers em Campina Grande, Paraíba. Ca-bral ED, Guedes AP. J Bras Orto-don Ortop Facial; 2002; 7: 235-237.

Evaluation of Moyers' tables to estimate the width of canine and premolars: a study in Natal-RN. Cabral ED, Caldas JA , França A, Cabral Filho H,Caldas SGFR. J. bras. ortodon. ortop. Facial; 2004; 9:37-40.

Development of a prediction equation for the mixed dentition in a Pakistani sample. Bherwani AK, Fida M. American Journal of Orthodontics and Dentofacial Or-thopedics; 2011;140: 626-632.

The prediction of the size of unerupted canines and premolars in a contemporary orthodontic population. Tanaka MM, Johnston LE. J Am Dent Assoc;1974; 88: 798-801.

Applicability of Three Tooth Size Prediction Methods for White Brazilians. Melgaço CA, Araújo MT, Ruellas ACO. Angle Orthodontist; 2006; 76: 644-649.

Applicability of Moyers analy-sis in mixed dentition: A systemat-ic review. Galvão MAB, Dominguez GC, Tormin ST, Akamine A, Torta-mano A, Fantini SM. Dental Press J Orthod; 2013; 18:100-105.

Downloads

Veröffentlicht

2019-06-26

Ausgabe

Bd. 7 Nr. 1 (2019)

Rubrik

Development of Craniofacial Structures

Lizenz

Authors who publish with this journal agree to the following terms:

  1. The Author retains copyright in the Work, where the term “Work” shall include all digital objects that may result in subsequent electronic publication or distribution.
  2. Upon acceptance of the Work, the author shall grant to the Publisher the right of first publication of the Work.
  3. The Author shall grant to the Publisher and its agents the nonexclusive perpetual right and license to publish, archive, and make accessible the Work in whole or in part in all forms of media now or hereafter known under a Creative Commons Attribution 4.0 International License or its equivalent, which, for the avoidance of doubt, allows others to copy, distribute, and transmit the Work under the following conditions:
    1. Attribution—other users must attribute the Work in the manner specified by the author as indicated on the journal Web site;
    with the understanding that the above condition can be waived with permission from the Author and that where the Work or any of its elements is in the public domain under applicable law, that status is in no way affected by the license.
  4. The Author is able to enter into separate, additional contractual arrangements for the nonexclusive distribution of the journal's published version of the Work (e.g., post it to an institutional repository or publish it in a book), as long as there is provided in the document an acknowledgement of its initial publication in this journal.
  5. Authors are permitted and encouraged to post online a prepublication manuscript (but not the Publisher’s final formatted PDF version of the Work) in institutional repositories or on their Websites prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work. Any such posting made before acceptance and publication of the Work shall be updated upon publication to include a reference to the Publisher-assigned DOI (Digital Object Identifier) and a link to the online abstract for the final published Work in the Journal.
  6. Upon Publisher’s request, the Author agrees to furnish promptly to Publisher, at the Author’s own expense, written evidence of the permissions, licenses, and consents for use of third-party material included within the Work, except as determined by Publisher to be covered by the principles of Fair Use.
  7. The Author represents and warrants that:
    1. the Work is the Author’s original work;
    2. the Author has not transferred, and will not transfer, exclusive rights in the Work to any third party;
    3. the Work is not pending review or under consideration by another publisher;
    4. the Work has not previously been published;
    5. the Work contains no misrepresentation or infringement of the Work or property of other authors or third parties; and
    6. the Work contains no libel, invasion of privacy, or other unlawful matter.
  8. The Author agrees to indemnify and hold Publisher harmless from Author’s breach of the representations and warranties contained in Paragraph 6 above, as well as any claim or proceeding relating to Publisher’s use and publication of any content contained in the Work, including third-party content.

Revised 7/16/2018. Revision Description: Removed outdated link.