Measuring Noise Levels in Dental Clinics

Autoři

  • Nebal Thabit Shaker College of Dentistry, University of Mustansiriyah.
  • Husam Mejbel Khalaf
  • Nagham Bahjat Kamel

DOI:

https://doi.org/10.5195/d3000.2026.1320

Klíčová slova:

Hearing Loss, Pollution, Work Safety

Abstrakt

Compared to other educational environment, the acoustic environment in the dental practical classes has been characterized by high dental noise levels. The presented study aims to quantify noise levels generated by the dental equipment under working settings throughout various dental clinics. A sound level meter with a microphone has been used for measuring the noise levels. The meter was positioned in the clinic at a 15cm distance from operator's ear, at the chair side instrument tray to increase noise levels that would reach a person standing close, and in the middle of the learning area. For stimulating the operator's auditory position in laboratories, a microphone was positioned 15cm from the technician's ear, and a second reading was acquired from a 2 m distance. When trimming acrylic, the acrylic trimmer (85.4 decibel (dB) at a 15cm distance) was the noisiest piece of equipment measured in this investigation. When drilling teeth in dental clinics, the turbine in the middle of the learning area made the most noise (79.1 dB). The dental equipment’s noise levels throughout cutting activities have been quite different from those during non-cutting activities. The study's noise levels were deemed to be somewhat close to the 85 dB threshold, which is the limit of hearing loss risk.

Reference

1. Singh S, Gambhir RS, Singh G, Sharma S, Kaur A. Noise levels in a dental teaching institute - A matter of concern. J Clin Exp Dent. 2012 Jul; 4(3): e141–e145.

2. Garner GG, Federman J, Johnson A. Noise induced hearing loss in the dental environment: An audiologist's perspective. J Ga Dent Assoc. 2002; 15:17–9.

3. Choosong T, Kaimook W, Tantisarasart R, Sooksamear P, Chayaphum S, Kongkamol C, Srisintorn W, Phakthongsuk P. Noise exposure asessment in a dental school. Safe and Health at Work. 2011; 2:348–354.

4. Setcos JC, Mahyuddin A. Noise levels encountered in dental clinical and laboratory practice. Int J Prosthodont. 1998; 11:150–7

5. Qsaibati ML, Ibrahim O. Noise levels of dental equipment used in dental college of Damascus University. Dental Res J. 2014; 11(November (6)):624–630.

6. Hyson JM. The air turbine and hearing loss: Are dentists at risk? JADA 2002; 133:1639-42.

7. Al Shanqiti AM, Abugad HA, Salama KF. Assessment of Ambient Noise Exposure among Medical Staff in Dental Clinics Center of Dammam Medical Complex, Saudi Arabia. Journal of Ecophysiology and Occupational Health. Volume 20, Issue 3&4, December 2020.

8. Sampio Fernandes JC, Carvalho AP, Gallas M, Vaz P, Matos PA. Noise levels in dental schools. Eur J Dent Educ. 2006; 10:32–7.

9. Al-Rawi NH., Al Nuaimi S, Sadiqi A, Azaiah E, Ezzeddine D, Ghunaim Q, Abbas Z. Occupational noise-induced hearing loss among dental professionals. Quintessence International. Volume 50, number 3, March, 2019.

10. Leggat PA, Chowanadisai S, Kukiattrakoon B, Yapong B, Kedjarune

U. Occupational hygiene practices of dentists in southern Thailand. Int Dent J. 2001; 51:11–6.

11. Goswami M, Singh D, Vashist B, Marwaha S. Noise levels and sound pollution associated with various operative procedures and equipment in a pediatric dental environment—A clinical study. J Oral Biol Craniofac Res.2017 Sep-Dec; 7(3): 182–187.

12. Khaled J, Ulrich K, Deanna M. Assessment of noise exposures in a pediatric dentistry residency clinic. Pediatr Dent. 2011; 33(July–August (4)):343–348.

13. Mahipal R, Prasad B. Noise pollution and control. J Ind Pollut Control. 2004; 20:149–58.

14. Leggat P, Kedjarune U, Derek R. Occupational health problems in modern dentistry: a review. Medicine Industrial health.2007.

15. Kuen WM, Wong H, Mak C. Dental Environmental Noise Evaluation and Health Risk Model Construction to Dental Professionals.Medicine International journal of environmental research and public health. 19 September 2017.

16. Kadanakuppe S, Bhat PK, Jyothi C, Ramegowda C. Assessment of noise levels of the equipment used in the dental teaching institution, Bangalore. Indian J Dent Res. May-Jun 2011; 22(3):424-31.

17. Nimmanon V,Rodanant P, Klannukarn CR, Ponpai N, Leeyawattananupong W, Sringamprom S. Noise level in a dental laboratory. J Dent Assoc Thai. 2009; 59:173.

18. Bahannan S, el-Hamid AA, Bahnassy A. Noise level of dental handpieces and laboratory engines. J Prosthet Dent 1993; 70:356-60.

19. Altinӧz HC, Gӧkbudak R, Bayraktar A, Belli S. A pilot study of measurement of the frequency of sounds emitted by high- speed dental air turbines. J Oral Sci. 2001; 43:189.

20. Monaghan DM, Wilson NHF, Darvell BW. The performance of air- turbine handpieces in general dental practice. Operative Dentistry 2005; 30:16-25.

21. Trenter SC, Walmsley AD. Ultrasonic dental scaler: associated hazards. J Clin Periodontol. 2003; 30:95.

22. Szymanska J. Work-related noise hazards in the dental surgery. Ann Agric Environ Med. 2000; 7:67.

23. Sorainen E, Rytkönen E. High-frequency noise in dentistry. AIHA J. Mar-Apr 2002; 63(2):231-3.

24. Kuen WM, Wong H, Mak C. Negative Effects of Dental Equipment Noise on Dental Professionals’ Health Quality.26th International Congress of Sound Vi

Stahování

Publikováno

2026-06-02

Číslo

Vol 14 No 1 (2026)

Sekce

Adults & the Elderly

Licence

Copyright (c) 2026 Nebal Thabit Shaker, Husam Mejbel Khalaf, Nagham Bahjat Kamel

Creative Commons License

Tato práce je licencována pod Mezinárodní licencí Creative Commons Attribution 4.0 .

Authors who publish with this journal agree to the following terms:

  1. The Author retains copyright in the Work, where the term “Work” shall include all digital objects that may result in subsequent electronic publication or distribution.
  2. Upon acceptance of the Work, the author shall grant to the Publisher the right of first publication of the Work.
  3. The Author shall grant to the Publisher and its agents the nonexclusive perpetual right and license to publish, archive, and make accessible the Work in whole or in part in all forms of media now or hereafter known under a Creative Commons Attribution 4.0 International License or its equivalent, which, for the avoidance of doubt, allows others to copy, distribute, and transmit the Work under the following conditions:
    1. Attribution—other users must attribute the Work in the manner specified by the author as indicated on the journal Web site;
    with the understanding that the above condition can be waived with permission from the Author and that where the Work or any of its elements is in the public domain under applicable law, that status is in no way affected by the license.
  4. The Author is able to enter into separate, additional contractual arrangements for the nonexclusive distribution of the journal's published version of the Work (e.g., post it to an institutional repository or publish it in a book), as long as there is provided in the document an acknowledgement of its initial publication in this journal.
  5. Authors are permitted and encouraged to post online a prepublication manuscript (but not the Publisher’s final formatted PDF version of the Work) in institutional repositories or on their Websites prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work. Any such posting made before acceptance and publication of the Work shall be updated upon publication to include a reference to the Publisher-assigned DOI (Digital Object Identifier) and a link to the online abstract for the final published Work in the Journal.
  6. Upon Publisher’s request, the Author agrees to furnish promptly to Publisher, at the Author’s own expense, written evidence of the permissions, licenses, and consents for use of third-party material included within the Work, except as determined by Publisher to be covered by the principles of Fair Use.
  7. The Author represents and warrants that:
    1. the Work is the Author’s original work;
    2. the Author has not transferred, and will not transfer, exclusive rights in the Work to any third party;
    3. the Work is not pending review or under consideration by another publisher;
    4. the Work has not previously been published;
    5. the Work contains no misrepresentation or infringement of the Work or property of other authors or third parties; and
    6. the Work contains no libel, invasion of privacy, or other unlawful matter.
  8. The Author agrees to indemnify and hold Publisher harmless from Author’s breach of the representations and warranties contained in Paragraph 6 above, as well as any claim or proceeding relating to Publisher’s use and publication of any content contained in the Work, including third-party content.

Revised 7/16/2018. Revision Description: Removed outdated link.