Effect of Different Surface Treatment on Hardness of Dental Alloys

Authors

  • Evan Hussain Alwan Department of Prosthetic Dental Technology, Medical Technical institute, Middle Technical University, Iraq.
  • Sara Abdulbast Turki
  • Zaid Ezzat Abdul Majeed

DOI:

https://doi.org/10.5195/d3000.2025.1088

Keywords:

Dentures, Tooth Loss, Prosthodontics

Abstract

Objectives: Investigate different surface treatments on hardness of specimens produced by CAD-CAM milling techniques and selective laser melting technique. Materials and Methods: Thirty disc-shaped specimens were put into three main groups. Each group has ten examples of Co-Cr metal that were made of different materials. There were three kinds of milling: hard, selective laser melting (3D printer), and soft. Everything was cut up into 15 mm wide pieces that were 3 mm thick so that they could be used for more tests. The last step was to finish them off and make their surfaces smooth with a diamond grinder. A scanning electron microscope (SEM) was used to look at one example from each group and figure out how the surface of the metal frame was made. We tested how hard specimens were. We used the independent sample one-way ANOVA to determine differences. Results: Hardness tests for all test groups in the study showed that 3D printing usually gave the best hardness in the control and sandblast groups. Hard cutting gave the most hardness in the Laser group.  We used One- and Two-way ANOVA and Levene's test to look at the data statistically. All the tests had p-values of 0.001, which means that the hardness values for each milling type are very different from one another. Conclusion: 3D printing generally resulted in the highest hardness values, and the control and sandblast groups hard milling showed superior hardness in the Laser group.

Downloads

Published

2025-12-12

Issue

Vol. 13 No. 1 (2025)

Section

Adults & the Elderly

License

Copyright (c) 2025 Evan Hussain Alwan, Sara Abdulbast Turki, Zaid Ezzat Abdul Majeed

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

  1. The Author retains copyright in the Work, where the term “Work” shall include all digital objects that may result in subsequent electronic publication or distribution.
  2. Upon acceptance of the Work, the author shall grant to the Publisher the right of first publication of the Work.
  3. The Author shall grant to the Publisher and its agents the nonexclusive perpetual right and license to publish, archive, and make accessible the Work in whole or in part in all forms of media now or hereafter known under a Creative Commons Attribution 4.0 International License or its equivalent, which, for the avoidance of doubt, allows others to copy, distribute, and transmit the Work under the following conditions:
    1. Attribution—other users must attribute the Work in the manner specified by the author as indicated on the journal Web site;
    with the understanding that the above condition can be waived with permission from the Author and that where the Work or any of its elements is in the public domain under applicable law, that status is in no way affected by the license.
  4. The Author is able to enter into separate, additional contractual arrangements for the nonexclusive distribution of the journal's published version of the Work (e.g., post it to an institutional repository or publish it in a book), as long as there is provided in the document an acknowledgement of its initial publication in this journal.
  5. Authors are permitted and encouraged to post online a prepublication manuscript (but not the Publisher’s final formatted PDF version of the Work) in institutional repositories or on their Websites prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work. Any such posting made before acceptance and publication of the Work shall be updated upon publication to include a reference to the Publisher-assigned DOI (Digital Object Identifier) and a link to the online abstract for the final published Work in the Journal.
  6. Upon Publisher’s request, the Author agrees to furnish promptly to Publisher, at the Author’s own expense, written evidence of the permissions, licenses, and consents for use of third-party material included within the Work, except as determined by Publisher to be covered by the principles of Fair Use.
  7. The Author represents and warrants that:
    1. the Work is the Author’s original work;
    2. the Author has not transferred, and will not transfer, exclusive rights in the Work to any third party;
    3. the Work is not pending review or under consideration by another publisher;
    4. the Work has not previously been published;
    5. the Work contains no misrepresentation or infringement of the Work or property of other authors or third parties; and
    6. the Work contains no libel, invasion of privacy, or other unlawful matter.
  8. The Author agrees to indemnify and hold Publisher harmless from Author’s breach of the representations and warranties contained in Paragraph 6 above, as well as any claim or proceeding relating to Publisher’s use and publication of any content contained in the Work, including third-party content.

Revised 7/16/2018. Revision Description: Removed outdated link.