Palatal Depth, Anchoring Holes, and Denture Cleanser Types on Adaptation of Acrylic Denture Bases

Authors

  • Ali Nima Ahmed Hussein
  • Mustafa Mahdi Jassim
  • Rola Waleed Abdul-Razaq
  • Abdalbseet A Fatalla
  • Matheel Al-Rawas Prosthodontic Unit, School of Dental Sciences, Health Campus, Universiti Sains Malaysia, Kubang Kerian, Kota Bharu, Kelantan, Malaysia
  • Mustafa Shakir Mahmood

DOI:

https://doi.org/10.5195/d3000.2026.1108

Keywords:

Dentures, Tooth Loss, Prosthodontics

Abstract

Objective: This study examines how palatal vault depth, mechanical anchoring, processing techniques, and denture cleanser immersion affect the posterior palatal adaptation of acrylic denture bases. Materials andMethods: Forty-eight PMMA denture bases were fabricated using either compression or injection molding. They were categorized by palatal depth (shallow, medium, high) and the presence or absence of anchoring holes. Specimens were immersed in four solutions—distilled water, 1% sodium hypochlorite, 2% chlorhexidine, and Kin® effervescent tablets—for 3, 10, 30, or 60 days. Digital gap measurements were analyzed using two-way ANOVA and Tukey’s HSD tests (α = 0.05). Results: Adaptation was significantly affected by palatal depth, anchoring, processing method, and immersion time (p < 0.05). Different gap distances were observed across palatal depths, with anchored specimens demonstrating better adaptation. Injection molding provided greater dimensional stability over time than compression molding. However, cleanser type did not significantly influence adaptation (p > 0.05), regardless of immersion duration. Conclusion: Posterior palatal adaptation is mainly influenced by fabrication method, mechanical anchoring, and immersion time, while cleanser type has minimal effect. Optimizing these factors can improve denture fit and longevity.

References

Rola WA, Ali NA. Estimation of the linear dimensional changes of autoclave-cured acrylic resin with multiple palatal depths and investment materials. Journal of Baghdad College of Dentistry. 2015;27(2):32-42.

Sakaguchi RL, Ferracane JL, Powers JM. Craig’s restorative dental materials. 14th ed. St. Louis (Missouri): Elsevier, Cop; 2019.

Srinivasan N, G D. Polyamide as a denture base material- a review. International Journal of Current Advanced Research. 2017 Apr 28;6(4):3272–4.

Laughlin GA, Eick JD, Glaros AG, Young L, Moore DJ. A comparison of palatal adaptation in acrylic resin denture bases using conventional and anchored polymerization techniques. Journal of Prosthodontics. 2001 Dec;10(4):204–11.

Keenan PLJ, Radford DR, Clark RKF. Dimensional change in complete dentures fabricated by injection molding and microwave processing. The Journal of Prosthetic Dentistry [Internet]. 2003 Jan 1 [cited 2022 Apr 24];89(1):37–44.

Cheng YY, Chow TW, Ladizesky NH. Denture base resin reinforced with high-performance polyethylene fiber: Water sorption and dimensional changes during immersion. Journal of Macromolecular Science, Part B. 1993 Dec;32(4):433–81.

SYKORA O, SUTOW EJ. Posterior palatal seal adaptation: influence of a high expansion stone. Journal of Oral Rehabilitation. 1996 May;23(5):342–5.

Consani RLX, Domitti SS, Consani S. Effect of a new tension system, used in acrylic resin flashing, on the dimensional stability of denture bases. The Journal of Prosthetic Dentistry. 2002 Sep;88(3):285–9.

Fatihallah AA, Rola WA, Ali NA. Teeth Displacement and Palatal Adaptation of Autoclave Cured acrylic resin with Various Palates and Investments. Journal of Baghdad College of Dentistry. 2016;28(1):1-0.

Tsuboi A, Ozawa K, Watanabe M. Water absorption characteristics of two types of acrylic resin obturators. The Journal of Prosthetic Dentistry. 2005 Oct;94(4):382–8.

Ristic B, Carr L. Water sorption by denture acrylic resin and consequent changes in vertical dimension. The Journal of Prosthetic Dentistry. 1987 Dec;58(6):689–93.

Nejatidanesh F, Savabi G, Savabi O, Dastgheib B. Effect of the processing cycle on dimensional changes of heat-polymerized denture base resins. Dental Research Journal [Internet]. 2015 [cited 2019 Dec 14];12(4):301.

El Bahra S, Ludwig K, Samran A, Freitag-Wolf S, Kern M. Linear and volumetric dimensional changes of injection-molded PMMA denture base resins. Dental Materials. 2013 Nov;29(11):1091–7.

Nogueira SS, Ogle RE, Davis EL. Comparison of accuracy between compression- and injection-molded complete dentures. The Journal of Prosthetic Dentistry [Internet]. 1999 Sep [cited 2019 Dec 14];82(3):291–300.

Degirmenci K, Hayati Atala M, Sabak C. Effect of Different Denture Base Cleansers on Surface Roughness of Heat Polymerised Acrylic Materials with Different Curing Process. Odovtos - International Journal of Dental Sciences. 2020 May 19;22(3):281–9.

Helena B, Izumida FE, Moffa EB, Pavarina AC, Jorge JH, Giampaolo ET. Effects of short-term immersion and brushing with different denture cleansers on the roughness, hardness, and color of two types of acrylic resin. PubMed. 2015 Jun 1;28(3):150–6.

Dl J, Duncanson Mg. The plastic postpalatal denture seal. PubMed. 1987 Jul 1;18(7):457–62.

Mehra M, Vahidi F, Berg RW. A Complete Denture Impression Technique Survey of Postdoctoral Prosthodontic Programs in the United States. Journal of Prosthodontics. 2013 Oct 7;23(4):320–7.

Schiller S, Rustemeier E, Kraus D, Stark H, Frauke Müller, Utz KH. Misfit of Complete Maxillary Dentures’ Posterior Palatal Seal following Polymerisation with Four Different Autopolymerising Resins: An In Vitro Study. Materials. 2022 Jul 30;15(15):5285–5.

Basavanna JM. Effects of Laboratory Disinfecting Agents on Dimensional Stability of Three Commercially Available Heat-Cured Denture Acrylic Resins in India: An In-Vitro Study. Journal of clinical and diagnostic research. 2016;10(3).

Puri D. An Evaluative In Vitro Study of the Effect of Three Commercially Available Denture Cleansers. Int J Prosthodont Restor Dent. 2009;10(1):26–31.

Zidan S, Silikas N, Haider J, Yates J. Effect of Cleansers on the Colour Stability of Zirconia Impregnated PMMA Bio-Nanocomposite. Nanomaterials. 2020 Sep 6;10(9):1757.

Polyzois GL, Zissis AJ, Yannikakis SA. The effect of glutaraldehyde and microwave disinfection on some properties of acrylic denture resin. PubMed. 1995 Mar 1;8(2):150– 4.

Nirale RM, Thombre R, Kubasad G. Comparative evaluation of sodium hypochlorite and microwave disinfection on the dimensional stability of denture bases. The Journal of Advanced Prosthodontics. 2012;4(1):24.

Davi LR. Effect of the physical properties of acrylic resin of overnight immersion in sodium hypochlorite solution. Gerodontology. 2009;27(4):297–302.

Paranhos H de FO, Peracini A, Pisani MX, Oliveira V de C, Souza RF de, Silva-Lovato CH. Color Stability, Surface Roughness and Flexural Strength of an Acrylic Resin Submitted to Simulated Overnight Immersion in Denture Cleansers. Brazilian Dental Journal. 2013 Apr;24(2):152–6.

Machado AL, Breeding LC, Vergani CE, da Cruz Perez LE. Hardness and surface roughness of relining and denture base acrylic resins after repeated disinfection procedures. The Journal of Prosthetic Dentistry. 2009 Aug;102(2):115–22.

Porwal A, Khandelwal M, Punia V, Sharma V. Effect of denture cleansers on color stability, surface roughness, and hardness of different denture base resins. ProQuest [Internet]. 2017 Jan 1 [cited 2022 Sep 25];16(12).

Mohammed H, Singh S, Pa H, Amarnath GS, Kundapur, Pasha N, et al. Evaluate the Effect of Commercially Available Denture Cleansers on Surface Hardness and Roughness of Denture Liners at Various Time Intervals. International Journal of Biomedical Science. 2016 Dec 15;12(4):130–42.

Adnan DrMA, Aljudy DrHJ, Fatihallah DrAA. Comparative study of maxillary complete denture base retention using different impression materials. Mustansiria Dental Journal. 2018 Mar 19;7(1):126–33.

Shekhar A, Das S, Bhattacharyya J, Goel P, Majumdar S, Ghosh S. A comparative analysis of salivary factors and maxillary denture retention in different arch forms: An in vivo study. The Journal of the Indian Prosthodontic Society [Internet]. 2018 [cited 2020 Nov 18];18(1):53–60

Downloads

Published

2026-02-05

Issue

Vol. 14 No. 1 (2026)

Section

Adults & the Elderly

License

Copyright (c) 2026 Ali Nima Ahmed Hussein , Mustafa Mahdi Jassim, Rola Waleed Abdul-Razaq, Abdalbseet A Fatalla , Matheel Al-Rawas, Mustafa Shakir Mahmood

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

  1. The Author retains copyright in the Work, where the term “Work” shall include all digital objects that may result in subsequent electronic publication or distribution.
  2. Upon acceptance of the Work, the author shall grant to the Publisher the right of first publication of the Work.
  3. The Author shall grant to the Publisher and its agents the nonexclusive perpetual right and license to publish, archive, and make accessible the Work in whole or in part in all forms of media now or hereafter known under a Creative Commons Attribution 4.0 International License or its equivalent, which, for the avoidance of doubt, allows others to copy, distribute, and transmit the Work under the following conditions:
    1. Attribution—other users must attribute the Work in the manner specified by the author as indicated on the journal Web site;
    with the understanding that the above condition can be waived with permission from the Author and that where the Work or any of its elements is in the public domain under applicable law, that status is in no way affected by the license.
  4. The Author is able to enter into separate, additional contractual arrangements for the nonexclusive distribution of the journal's published version of the Work (e.g., post it to an institutional repository or publish it in a book), as long as there is provided in the document an acknowledgement of its initial publication in this journal.
  5. Authors are permitted and encouraged to post online a prepublication manuscript (but not the Publisher’s final formatted PDF version of the Work) in institutional repositories or on their Websites prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work. Any such posting made before acceptance and publication of the Work shall be updated upon publication to include a reference to the Publisher-assigned DOI (Digital Object Identifier) and a link to the online abstract for the final published Work in the Journal.
  6. Upon Publisher’s request, the Author agrees to furnish promptly to Publisher, at the Author’s own expense, written evidence of the permissions, licenses, and consents for use of third-party material included within the Work, except as determined by Publisher to be covered by the principles of Fair Use.
  7. The Author represents and warrants that:
    1. the Work is the Author’s original work;
    2. the Author has not transferred, and will not transfer, exclusive rights in the Work to any third party;
    3. the Work is not pending review or under consideration by another publisher;
    4. the Work has not previously been published;
    5. the Work contains no misrepresentation or infringement of the Work or property of other authors or third parties; and
    6. the Work contains no libel, invasion of privacy, or other unlawful matter.
  8. The Author agrees to indemnify and hold Publisher harmless from Author’s breach of the representations and warranties contained in Paragraph 6 above, as well as any claim or proceeding relating to Publisher’s use and publication of any content contained in the Work, including third-party content.

Revised 7/16/2018. Revision Description: Removed outdated link.